International Harvester 424 Technical Specifications
International Harvester 424 is a Row-Crop tractor that was produced by the John Deere between 1964 – 1967.
Below you will find detailed technical specifications for International Harvester 424 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 424 Production
| Manufacturer: | |
| Manufacturer | International Harvester |
| Utility tractor | |
| Factories | Doncaster, England |
| Louisville, Kentucky, USA | |
| Original price | $3,300 (1967) |
| Engine: | 31.90 hp 23.8 kW |
| PTO (tested) | 36.97 hp 27.6 kW |
International Harvester 424 Mechanical
| Two-wheel drive | |
| Steering | power assist |
| Differential mechanical dry disc brakes | |
| Open operator station. | |
Tracktor Hitch
| Rear Type | I |
Power Take-off (PTO)
| Rear PTO | live |
| Rear RPM | 540 |
International Harvester 424 Engine detail
| Engine Detail | |
| International Harvester C-146 | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 145.3 ci 2.4 L |
| Bore/Stroke | 3.375×4.0625 inches 86 x 103 mm |
| Air cleaner | dry |
| Compression | 7.6:1 |
| Rated RPM | 2000 |
| Starter volts | 12 |
| Engine Oil | |||
| Type | sliding gear |
| Gears | 8 forward and 2 reverse |
| Clutch | dry disc |
| Oil capacity | 20 qts 18.9 L |
International Harvester 424 Dimensions
| Wheelbase | 70 inches 177 cm |
| Length | 121 inches 307 cm |
| Width | 67.25 inches 170 cm |
| Height | 57 inches 144 cm |
| Weight | 4,055 lbs 1839 kg |
International Harvester 424 Tests
| Nebraska Tractor Test 908 | |
| Gasoline 8-speed 2WD September 8 – 15, 1965 Link: Nebraska Tractor Test 908 file | |
| PTO performance | |
| Power at rated engine speed | 36.97 hp 27.6 kW |
| Fuel use | 3.0 gal/hour 11.4 l/hour |
| Drawbar performance | |
| Max power | 31.44 hp 23.4 kW |
| Fuel use | 3.0 gal/hour 11.4 l/hour |
| Gear 5 used for power test. | |
| Max pull | 5,282 lbs 2395 kg |
| Gear 1 used for pull test. | |
| Nebraska Tractor Test 911 | |||
| Nebraska Tractor Test 911 | |
| Diesel 8-speed 2WD September 16 – 23, 1965 Link: Nebraska Tractor Test 911 file | |
| PTO performance | |
| Power at rated engine speed | 36.91 hp 27.5 kW |
| Fuel use | 2.6 gal/hour 9.8 l/hour |
| Drawbar performance | |
| Max power | 31.90 hp 23.8 kW |
| Fuel use | 2.8 gal/hour 10.6 l/hour |
| Gear 5 used for power test. | |
| Max pull | 5,374 lbs 2437 kg |
| Gear 1 used for pull test. | |
International Harvester 424 Attachments
589 kg
725 kg
213 cm
3 cm
253 kg
101 cm
907 kg
1814 kg
377 cm
248 cm
526 kg
101 cm
612 kg
1179 kg
377 cm
248 cm
526 kg
101 cm
FAQ
Is International Harvester 424 a good tractor?
The International Harvester 424 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 424 take?
Check out the International Harvester 424 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester 424 was an agricultural tractor model made from 1964 – 1967
How much horsepower is a International Harvester 424?
The engine tested at 31.90 hp
23.8 kW drawbar and 36.97 hp
27.6 kW kW PTO horsepower.
How much does a International Harvester 424 tractor weight?
Depending on the engine type, the International Harvester 424 weight ranges from 4,055 lbs
1839 kg .
How much can a International Harvester 424 Pull?
The max pulling capacity of the International Harvester 424 tractors starts at 5,282 lbs
2395 kg but may be slightly higher depending on the trim.