AGCO Allis 9735

AGCO Allis 9735 Row-Crop tractor Technical Specifications

AGCO Allis 9735 is a Row-Crop tractor that was produced by the John Deere between 1998 – 2001.

Below you will find detailed technical specifications for AGCO Allis 9735 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

AGCO Allis 9735 Production

Manufacturer: AGCO Allis
Type: Row-Crop tractor
Original price: $75,500 (1999)

AGCO Allis 9735 Power

PTO (claimed): 125 hp
93.2 kW
Drawbar (tested): 114.13 hp
85.1 kW
PTO (tested): 137.32 hp
102.4 kW

AGCO Allis 9735 Electrical

Ground: negative
Battery volts: 12

AGCO Allis 9735 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: hydraulic wet disc
Transmissions: 18-speed full power shift
  32-speed partial power shift


Type: closed
Valves: 2
Pump flow: 27.7 gpm
104.8 lpm

Tracktor Hitch

Rear Type: II,III
Rear lift: 10400 lbs
4717 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/1000

Title serial numbers

Location: Console, right side
1998: G001001
1999: H001001
2000: J01001
2001: K01001

how to read serial numbers…

What year is my AGCO Allis 9735? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

AGCO Allis 9735 Engine detail

Engine Detail
Sisu Diesel
turbocharged diesel
Displacement: 402 ci
6.6 L
Bore/Stroke: 4.251×4.72 inches
108 x 120 mm
Air cleaner: paper elements
Compression: 16.5:1
Rated RPM: 2200
Starter volts: 12

AGCO Allis 9735 Transmission overview

Engine Oil

Type: full power shift
Gears: 18 forward and 6 reverse
Clutch: hydraulic wet disc

AGCO Allis 9735 Dimensions

Wheelbase: 117 inches
297 cm
Operating weight: 16,180 lbs
7339 kg
Ballasted weight: 18,090 lbs
8205 kg

AGCO Allis 9735 Tests

OCED Tractor Test 1758

OCED Tractor Test 1758
Diesel 32-speed 4WD
October 2 – November 19, 1998
Link: OCED Tractor Test 1758 file
PTO performance
Max power: 137.32 hp
102.4 kW
Fuel use: 7.8 gal/hour
29.5 l/hour
Power at rated engine speed: 125.58 hp
93.6 kW
Fuel use: 8.1 gal/hour
30.7 l/hour
Power at rated PTO speed: 132.17 hp
98.6 kW
Fuel use: 8.1 gal/hour
30.7 l/hour
Drawbar performance
Max power: 114.13 hp
85.1 kW
Fuel use: 8.2 gal/hour
31.0 l/hour
Gear 1HB used for power test.
Max pull: 14,836 lbs
6729 kg
Gear 2LB used for pull test.


Is AGCO Allis 9735 a good tractor?

The AGCO Allis 9735 is one of the great tractors in the AGCO Allis stable, and it has earned AGCO Allis a fantastic reputation.

How much oil does a AGCO Allis 9735 take?

Check out the AGCO Allis 9735 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year AGCO Allis made the 9735?

The AGCO Allis 9735 was an agricultural tractor model made from 1998 – 2001

Where is the serial number on a AGCO Allis 9735?

Lookup console, right side

Leave a Comment