AGCO DT250B Row-Crop tractor Technical Specifications

AGCO DT250B is a Row-Crop tractor that was produced by the John Deere between 2009 – 2010.

Below you will find detailed technical specifications for AGCO DT250B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

AGCO DT250B Production

Manufacturer: AGCO
Type: Row-Crop tractor
Factory: Beauvais, France
Original price: $215,339 (2009 )
The AGCO DT250B is the same as a Massey Ferguson 8670.

AGCO DT250B Power

Engine: 290 hp
216.3 kW
PTO (claimed): 250 hp
186.4 kW
Drawbar (tested): 218.5 hp
162.9 kW
PTO (tested): 290.3 hp
216.5 kW

AGCO DT250B Electrical

Ground: negative
Charging system: alternator
Charging amps: 240
Battery volts: 12

AGCO DT250B Mechanical

Chassis: 4×4 MFWD 4WD
Final drives: inboard planetary
Differential lock: full locking electro-hydraulic front and rear
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optonal.
Transmission: continuously variable transmission


Type: closed center load sensing
Pressure: 2,901 psi
200.0 bar
Valves: 4 to 6
SCV flow: 26.4 gpm
99.9 lpm
Total flow: 46.2 gpm
174.9 lpm

Tracktor Hitch

Rear Type: 3
Rear lift (at ends): 26,460 lbs
12002 kg
Rear lift (at 24″/610mm): 21,336 lbs
9678 kg
Front Hitch: 3
Front lift (at ends): 11,020 lbs
4998 kg
Drawbar: Category 3
  Category 3 Heavy Duty*Optional
  Category 4*Optional

Power Take-off (PTO)

Rear PTO: independent
Clutch: electro-hydraulic
Rear RPM: 1000E/1000 (1.75)
Engine RPM: 1000@1970
Front PTO: optional
Front RPM: 1000

AGCO DT250B Engine detail

Engine Detail
turbocharged intercooled diesel
The engine uses AGCO`s e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR.
Displacement: 512.6 ci
8.4 L
Bore/Stroke: 4.37×5.71 inches
111 x 145 mm
Emissions: Tier III
Emission control: selective catalytic reduction (SCR)
  exhaust gas recirculation (EGR) optional
Power: 290 hp
216.3 kW
Maximum Power: 320 hp
238.6 kW
Fuel system: high-pressure common rail
Pre-heating: thermostart
Compression: 16.7:1
Rated RPM: 2200
Torque: 1033 lb-ft
1400.7 Nm
Torque RPM: 1500
Starter: electric
Starter volts: 12

AGCO DT250B Transmission overview

Engine Oil

Transmission: PowerMaxx CVT
Type: continuously variable transmission
Gears: infinite forward and reverse

AGCO DT250B Dimensions

Wheelbase: 122.2 inches
310 cm
Length: 215.7 inches
547 cm
Height (cab): 141 inches
358 cm
Shiping weight: 24250 lbs
10999 kg
Max weight: 38890 lbs
17640 kg
Front axle: Suspension optional
Rear axle: Bar: 4.33 by 118 inches
109 by 2997 mm
Rear axle: Bar: 4.33 by 105 inches
109 by 2667 mm (
Rear tread: 58.5 to 119.5 inches
148 to 303 cm

AGCO DT250B Tests

OCED Tractor Test 2498

OCED Tractor Test 2498
SCR diesel CVT 4WD
October 2008 – January 2009,
Link: OCED Tractor Test 2498 file
PTO performance
Max power: 290.3 hp
216.5 kW
Fuel use: 14.4 gal/hour
54.5 l/hour
Power at rated engine speed: 257.1 hp
191.7 kW
Fuel use: 13.7 gal/hour
51.9 l/hour
Power at rated PTO speed: 281.1 hp
209.6 kW
Fuel use: 14.4 gal/hour
54.5 l/hour
Drawbar performance
Max power: 218.5 hp
162.9 kW
Fuel use: 13.7 gal/hour
51.9 l/hour
Pull at 7.5 KPH
Max pull: 34,130 lbs
15481 kg
Pull at 3.8 KPH

OCED Tractor Test 2558

OCED Tractor Test 2558
EGR diesel CVT 4WD
October 2009 – March 2010,
Link: OCED Tractor Test 2558 file
PTO performance
Max power: 288.2 hp
214.9 kW
Fuel use: 15.9 gal/hour
60.2 l/hour
Power at rated engine speed: 254.0 hp
189.4 kW
Fuel use: 15.7 gal/hour
59.4 l/hour
Power at rated PTO speed: 275.8 hp
205.7 kW
Fuel use: 15.9 gal/hour
60.2 l/hour
Drawbar performance
Max power: 213.6 hp
159.3 kW
Fuel use: 15.7 gal/hour
59.4 l/hour
Pull at 7.6 KPH
Max pull: 30,335 lbs
13759 kg
Pull at 4.3 KPH


Is AGCO DT250B a good tractor?

The AGCO DT250B is one of the great tractors in the AGCO stable, and it has earned AGCO a fantastic reputation.

How much oil does a AGCO DT250B take?

Check out the AGCO DT250B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year AGCO made the DT225B

The AGCO DT250B was an agricultural tractor model made from 2009 – 2010

Leave a Comment