Allis Chalmers 200 Technical Specifications
Allis Chalmers 200 is a Row-Crop tractor that was produced by the John Deere between 1972 – 1975.
Below you will find detailed technical specifications for Allis Chalmers 200 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Allis Chalmers 200 Production
Manufacturer: | |
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Total built | 10,126 |
Original price | $14,125 |
Engine: | 79.12 hp 59.0 kW |
PTO (tested) | 93.64 hp 69.8 kW |
Allis Chalmers 200 Electrical
Ground | negative |
Charging system | alternator |
Charging amps | 32 |
55 *Optional with cab. | |
Batteries | 1 |
2 | |
Battery volts | 12 |
Allis Chalmers 200 Mechanical
Two-wheel drive | |
Power steering | |
Ball actuated disc brakes | |
Open operator station. QCS cab optional starting in 1972. |
Capacity
Fuel | 48 gal 181.7 L |
Hydraulic system | 7 gal 26.5 L |
Hydraulics
Type | open center |
Capacity | 7 gal 26.5 L |
Pressure | 2300 psi 158.6 bar |
Valves | 2 |
Pump flow | 17.2 gpm 65.1 lpm |
Total flow | 21.02 gpm 79.6 lpm |
Tracktor Hitch
Rear Type | II |
Rear lift | 4,600 lbs 2086 kg |
Power Take-off (PTO)
Rear PTO | transmission |
independent OptOptional | |
Rear RPM | 540 |
540/1000 OptOptional |
Allis Chalmers 200 Engine detail
Engine Detail | |
Allis Chalmers | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 301 ci 4.9 L |
Bore/Stroke | 3.875×4.25 inches 98 x 108 mm |
Compression | 16.25:1 |
Rated RPM | 2200 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 12 |
Oil capacity | 15 qts 14.2 L |
Coolant capacity | 18 qts 17.0 L |
Engine Oil |
Type | constant mesh-helical gears |
Gears | 8 forward and 2 reverse |
Oil capacity | 38 qts 36.0 L |
Allis Chalmers 200 Dimensions
Wheelbase | 105.75 inches 268 cm |
Length | 175.5 inches 445 cm |
Width | 87.625 inches 222 cm |
Weight | 7,324 lbs 3322 kg |
Clearance (front axle) | 25.3 inches 64 cm |
Clearance (rear axle) | 27.1 inches 68 cm |
Allis Chalmers 200 Height | |
Steering wheel | 89.5 inches 227 cm |
Hood | 65.8 inches 167 cm |
Exhaust | 117.5 inches 298 cm |
Allis Chalmers 200 Tests
Nebraska Tractor Test 887 | |
Diesel 8-speed 2WD April 10 – 16, 1965 Link: Nebraska Tractor Test 887 file | |
PTO performance | |
Power at rated engine speed | 93.64 hp 69.8 kW |
Fuel use | 5.7 gal/hour 21.6 l/hour |
Power at rated PTO speed | 89.71 hp 66.9 kW |
Fuel use | 5.3 gal/hour 20.1 l/hour |
Drawbar performance | |
Max power | 79.12 hp 59.0 kW |
Fuel use | 5.7 gal/hour 21.6 l/hour |
Gear 4 used for power test. | |
Max pull | 8,917 lbs 4044 kg |
Gear 3 used for pull test. |
FAQ
Is Allis Chalmers 200 a good tractor?
The Allis Chalmers 200 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.
How much oil does a Allis Chalmers 200 take?
Check out the Allis Chalmers 200 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Allis Chalmers made the ?
The Allis Chalmers 200 was an agricultural tractor model made from 1972 – 1975
How much horsepower is a Allis Chalmers 200?
The engine tested at 79.12 hp
59.0 kW drawbar and 93.64 hp
69.8 kW kW PTO horsepower.
How much does a Allis Chalmers 200 tractor weight?
Depending on the engine type, the Allis Chalmers 200 weight ranges from 7,324 lbs
3322 kg .
How much can a Allis Chalmers 200 Pull?
The max pulling capacity of the Allis Chalmers 200 tractors starts at 8,917 lbs
4044 kg but may be slightly higher depending on the trim.
How much can a John Allis Chalmers 200 Lift?
Allis Chalmers 200 tractor hitch is capable of lifting 4,600 lbs
2086 kg.