Allis Chalmers 5020

Allis Chalmers 5020 Hinomoto built Technical Specifications

Allis Chalmers 5020 is a Row-Crop tractor that was produced by the John Deere between 1977 – 1985.

Below you will find detailed technical specifications for Allis Chalmers 5020 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 5020 Production

Distributor: Allis Chalmers
Manufacturer: Hinomoto
Type: Compact Utility tractor
Factory: Osaka, Japan
Total built: 8,500
Original price: $8,280 (1985 )
The Allis-Chalmers 5020 is similar to the Hinomoto E23 and Massey-Ferguson 210.

Allis Chalmers 5020 Power

Engine: 25 hp
18.6 kW
Drawbar (claimed): 17 hp
12.7 kW
PTO (claimed): 21 hp
15.7 kW
Plows: 1 (14-inch)
Drawbar (tested): 17.37 hp
13.0 kW
PTO (tested): 21.79 hp
16.2 kW

Allis Chalmers 5020 Electrical

Ground: negative
Charging system: alternator
Charging amps: 15
Battery volts: 12
Battery AH: 70

Allis Chalmers 5020 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Steering: manual
Brakes: differential mechanical drum and shoe
Cab: Two-post ROPS, optional ROPS canopy
Transmissions: 8-speed unsynchronized gear
  12-speed unsynchronized gear


Fuel: 7 gal
26.5 L
Hydraulic system: 5.5 gal
20.8 L


Type: open center
Capacity: 5.5 gal
20.8 L
Valves: 0 or 1
Pump flow: 5.44 gpm
20.6 lpm

Tracktor Hitch

Rear Type: I

Power Take-off (PTO)

Rear PTO: transmission
Rear RPM: 540
Engine RPM: 540@2320

Allis Chalmers 5020 Engine detail

Engine Detail
Toyosha S126
Displacement: 77.1 ci
1.3 L
Bore/Stroke: 3.62×3.74 inches
92 x 95 mm
Power: 25 hp
18.6 kW
Air cleaner: single paper element
Compression: 23.0:1
Rated RPM: 2500
Idle RPM: 750-2750
Firing order: 1-2
Starter: electric
Starter volts: 12
Coolant capacity: 5.3 qts
5.0 L

Allis Chalmers 5020 Transmission overview

Engine Oil

Type: unsynchronized gear
Gears: 8 forward and 2 reverse
Clutch: 215mm dry disc
Oil capacity: 22 qts
20.8 L
Four gears, plus reverse, with high and low ranges. The eight-speed appears to only have been available during early production.

Allis Chalmers 5020 Dimensions

Wheelbase: 59.8 inches
151 cm
Length: 98.9 inches
251 cm
Width: 48 inches
121 cm
Clearance (front axle): 12.6 inches
32 cm
Clearance (rear axle): 14 inches
35 cm
Front tread: 38.6 inches
98 cm
Rear tread: 39.2/51 inches
99/129 cm

Allis Chalmers 5020 Weight
2WD Shipping: 1900 lbs
861 kg
4WD Shipping: 2150 lbs
975 kg
Operating: 2060 lbs
934 kg (2WD)
Ballasted: 3358 lbs
1523 kg

Allis Chalmers 5020 Height
Steering wheel: 59.8 inches
151 cm
Hood: 44.7 inches
113 cm
ROPS: 85 inches
215 cm
Exhaust: 77.5 inches
196 cm

Allis Chalmers 5020 Tests

Nebraska Tractor Test 1270

Nebraska Tractor Test 1270
Diesel 8-speed 2WD
April 6 – 15, 1978
Link: Nebraska Tractor Test 1270 file
PTO performance
Power at rated engine speed: 21.79 hp
16.2 kW
Fuel use: 1.6 gal/hour
6.1 l/hour
Power at rated PTO speed: 20.78 hp
15.5 kW
Fuel use: 1.5 gal/hour
5.7 l/hour
Drawbar performance
Max power: 17.37 hp
13.0 kW
Fuel use: 1.6 gal/hour
6.1 l/hour
Gear 3H used for power test.
Max pull: 2,346 lbs
1064 kg
Gear 4L used for pull test.


Is Allis Chalmers 5020 a good tractor?

The Allis Chalmers 5020 is one of the great tractors in the Hinomoto stable, and it has earned Hinomoto a fantastic reputation.

How much oil does a Allis Chalmers 5020 take?

Check out the Allis Chalmers 5020 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Hinomoto made the 5015

The Allis Chalmers 5020 was an agricultural tractor model made from 1977 – 1985

Leave a Comment