Allis Chalmers 5030 Hinomoto built Specs & Features

Contents show

Allis Chalmers 5030 Hinomoto built Technical Specifications

Allis Chalmers 5030 is a Row-Crop tractor that was produced by the John Deere between 1979 – 1985.

Below you will find detailed technical specifications for Allis Chalmers 5030 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 5030 Production

Manufacturer:
Distributor:	Allis Chalmers
Manufacturer:	Hinomoto
Type:	Compact Utility tractor
Factory:	Osaka, Japan
Original price:	$9,230 (1985 )

Allis Chalmers 5030 Power

Engine:
Engine:	31 hp 23.1 kW
Drawbar (claimed):	22.4 hp 16.7 kW
PTO (claimed):	26 hp 19.4 kW
Plows:	2*12-inch
Drawbar (tested):	22.47 hp 16.8 kW
PTO (tested):	26.42 hp 19.7 kW

Allis Chalmers 5030 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	12
Battery volts:	12
Battery AH:	70

Allis Chalmers 5030 Mechanical

Chassis:

4×2 2WD

Steering:

manual

Brakes:

differential mechanical drum and shoe

Cab:

Two-post ROPS, optional ROPS canopy

Transmissions:

8-speed unsynchronized gear

12-speed unsynchronized gear

Capacity

Fuel:	7 gal 26.5 L
Hydraulic system:	6.7 gal 25.4 L

Hydraulics

Type:	open center
Capacity:	6.7 gal 25.4 L
Valves:	0 or 1
Pump flow:	5.44 gpm 20.6 lpm

Tracktor Hitch

Rear Type:

Power Take-off (PTO)

Rear PTO:	transmission
	live*Optional
Rear RPM:	540
Engine RPM:	540@2320

Allis Chalmers 5030 Engine detail

Engine Detail
Toyosha S148
diesel
2-cylinder
liquid-cooled
Displacement:	90.1 ci 1.5 L
Bore/Stroke:	3.82×3.94 inches 97 x 100 mm
Power:	31 hp 23.1 kW
Air cleaner:	dry
Compression:	23:1
Rated RPM:	2500
Idle RPM:	750-2750
Firing order:	1-2
Starter:	electric
Starter volts:	12
Coolant capacity:	5.3 qts 5.0 L

Allis Chalmers 5030 Transmission overview

Engine Oil

Type:	unsynchronized gear
Gears:	8 forward and 2 reverse
Clutch:	215mm dry disc
Oil capacity:	26.8 qts 25.4 L
Four gears (1-4) in two ranges (low/high). Tractor must be stopped, and clutch used, to shift gears or range.

Allis Chalmers 5030 Dimensions

Wheelbase:	61.8 inches 156 cm
Length:	100.4 inches 255 cm
Width:	53.5 inches 135 cm
Clearance (front axle):	14.5 inches 36 cm
Clearance (rear axle):	15.6 inches 39 cm
Front tread:	40.9 to 51.1 inches 103 to 129 cm
Rear tread:	40.9 to 62.5 inches 103 to 158 cm

Allis Chalmers 5030 Weight
Shipping:	2100 lbs 952 kg
Operating:	2530 lbs 1147 kg
Ballasted:	3876 lbs 1758 kg

Allis Chalmers 5030 Height
Steering wheel:	53.7 inches 136 cm
Hood:	45.1 inches 114 cm
ROPS:	86 inches 218 cm
Exhaust:	81.9 inches 208 cm

Allis Chalmers 5030 Tests

Nebraska Tractor Test 1271

Nebraska Tractor Test 1271
Diesel 8-speed 2WD April 6 – 21, 1978 Link: Nebraska Tractor Test 1271 file
PTO performance
Power at rated engine speed:	26.42 hp 19.7 kW
Fuel use:	2.0 gal/hour 7.6 l/hour
Power at rated PTO speed:	25.61 hp 19.1 kW
Fuel use:	1.9 gal/hour 7.2 l/hour
Drawbar performance
Max power:	22.47 hp 16.8 kW
Fuel use:	1.9 gal/hour 7.2 l/hour
Gear 1H used for power test.
Max pull:	3,389 lbs 1537 kg
Gear 3L used for pull test.

FAQ

Is Allis Chalmers 5030 a good tractor?

The Allis Chalmers 5030 is one of the great tractors in the Hinomoto stable, and it has earned Hinomoto a fantastic reputation.

How much oil does a Allis Chalmers 5030 take?

Check out the Allis Chalmers 5030 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Hinomoto made the 5020

The Allis Chalmers 5030 was an agricultural tractor model made from 1979 – 1985