Allis Chalmers 6070

Allis Chalmers 6070 Row-Crop tractor Technical Specifications

Allis Chalmers 6070 is a Row-Crop tractor that was produced by the John Deere between 1984 – 1985.

Below you will find detailed technical specifications for Allis Chalmers 6070 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 6070 Production

Manufacturer: Allis Chalmers
Type: Row-Crop tractor
Factory: West Allis, Wisconsin, USA
Total built: 972
Original price: $24,225
On December 6, 1985, a model 6070 tractor (serial #1972) was the final tractor to be built on the Allis-Chalmers assembly line in West Allis.

Allis Chalmers 6070 Power

Drawbar (tested): 58.35 hp
43.5 kW
PTO (tested): 70.78 hp
52.8 kW

Allis Chalmers 6070 Electrical

Charging system: alternator
Charging amps: 72
Battery volts: 12

Allis Chalmers 6070 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Four-post ROPS canopy. Optional cab and air-conditioning.
Transmission: 12-speed synchronized


Fuel: 32 gal
121.1 L
Rear diff.: 37 qts
35.0 L


Type: open center
Valves: 1
Pump flow: 11.4 gpm
43.1 lpm
Total flow: 19 gpm
71.9 lpm

Tracktor Hitch

Rear Type: II
Rear lift (at 24″/610mm): 3,500 lbs
1587 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540

Allis Chalmers 6070 Engine detail

Engine Detail
Allis Chalmers 433T
turbocharged diesel
liquid-cooled inline
Displacement: 200 ci
3.3 L
Bore/Stroke: 3.875×4.25 inches
98 x 108 mm
Air cleaner: paper element with pre-cleaner
Compression: 15.1:1
Rated RPM: 2300
Starter volts: 12
Oil capacity: 10 qts
9.5 L
Coolant capacity: 17 qts
16.1 L

Allis Chalmers 6070 Transmission overview

Engine Oil

Type: synchronized
Gears: 12 forward and 3 reverse
Oil capacity: 12 qts
11.4 L
Four gears, plus reverse, in three ranges. Synchronized shifting with clutch.

Allis Chalmers 6070 Dimensions

Wheelbase: 93 inches
236 cm (2WD)
  91.9 inches
233 cm (4WD)
Length: 146.5 inches
372 cm
Width: 68.5 inches
173 cm
Clearance (front axle): 18.1 inches
45 cm (4WD)
  20.4 inches
51 cm (2WD)
Clearance (rear axle): 26.7 inches
67 cm
Front tread: 56 to 79 inches
142 to 200 cm
Rear tread: 60 to 86 inches
152 to 218 cm

Allis Chalmers 6070 Weight
Shipping: 6,100 lbs
2766 kg
Operating: 7,285 lbs
3304 kg
Ballasted: 10,515 lbs
4769 kg

Allis Chalmers 6070 Height
Hood: 69.4 inches
176 cm
ROPS: 107.7 inches
273 cm
Cab: 103.2 inches
262 cm
Exhaust: 110.2 inches
279 cm

Allis Chalmers 6070 Tests

Nebraska Tractor Test 1545

Nebraska Tractor Test 1545
Diesel 12-speed 2WD
October 19 – 26, 1984
Link: Nebraska Tractor Test 1545 file
PTO performance
Power at rated engine speed: 70.78 hp
52.8 kW
Fuel use: 4.4 gal/hour
16.7 l/hour
Power at rated PTO speed: 71.01 hp
53.0 kW
Fuel use: 4.3 gal/hour
16.3 l/hour
Drawbar performance
Max power: 58.35 hp
43.5 kW
Fuel use: 4.4 gal/hour
16.7 l/hour
Gear 3I used for power test.
Max pull: 7,997 lbs
3627 kg
Gear 1I used for pull test.


Is Allis Chalmers 6070 a good tractor?

The Allis Chalmers 6070 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers 6070 take?

Check out the Allis Chalmers 6070 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the 6060

The Allis Chalmers 6070 was an agricultural tractor model made from 1984 – 1985

Leave a Comment