Allis Chalmers 7010

Allis Chalmers 7010 Technical Specifications

Allis Chalmers 7010 is a Row-Crop tractor that was produced by the John Deere between 1980 – 1981.

Below you will find detailed technical specifications for Allis Chalmers 7010 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 7010 Production

Manufacturer: Allis Chalmers
Type: Row-Crop tractor
Factory: West Allis, Wisconsin, USA
Total built: 2,436
Original price: $35,311

Allis Chalmers 7010 Power

Drawbar (tested): 89.10 hp
66.4 kW
PTO (tested): 106.72 hp
79.6 kW

Allis Chalmers 7010 Electrical

Charging system: alternator
Battery volts: 12

Allis Chalmers 7010 Mechanical

Chassis: 4×2 2WD
Final drives: inboard planetary
Differential lock: power
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Accousta cab standard with heat. Optional air-conditioning, radio, and 8-track player. Four-post ROPS canopy optional.
Transmissions: 16-speed partial power shift
  20-speed partial power shift
  12-speed partial power shift


Fuel: 54 gal
204.4 L
  13 gal
49.2 L (optional tank)
Rear diff.: 66.8 qts
63.2 L


Type: closed center
Valves: 2
Pump flow: 22 gpm
83.3 lpm
  13.5 gpm
51.1 lpm (transmission)
Total flow: 45 gpm
170.3 lpm
Steering flow: 9.5 gpm
36.0 lpm

Tracktor Hitch

Rear Type: III/II
Rear lift (at 24″/610mm): 6,680 lbs
3030 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540 1000

Title serial numbers

Location: Above PTO shield
1979: 1001
1980: 1925
1981: 2806
Final: 3433

how to read serial numbers…

What year is my Allis Chalmers 7010? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

Allis Chalmers 7010 Engine detail

Engine Detail
Allis Chalmers 649T
turbocharged diesel
liquid-cooled inline
Displacement: 301 ci
4.9 L
Bore/Stroke: 3.875×4.25 inches
98 x 108 mm
Air cleaner: dual paper elements
Compression: 16.25:1
Rated RPM: 2300
Firing order: 1-5-3-6-2-4
Starter volts: 12
Oil capacity: 20 qts
18.9 L
Coolant capacity: 26 qts
24.6 L

Allis Chalmers 7010 Transmission overview

Engine Oil

Transmission: Allis-Chalmers Power Director
Type: partial power shift
Gears: 16 forward and 4 reverse
Oil capacity: 29.6 qts
28.0 L
Four gears plus reverse with Slow and Fast ranges. Two-speed power shift (low/high) controlled by foot buttons.

Allis Chalmers 7010 Dimensions

Wheelbase: 106 inches
269 cm
Width: 92.6 inches
235 cm
  118.7 inches
301 cm (long axle)
Operating weight: 11,260 lbs
5107 kg
Ballasted weight: 12,790 lbs
5801 kg
Clearance (front axle): 21 inches
53 cm
Clearance (rear axle): 28 inches
71 cm
Rear axle: 3.625 inch diameter
92 mm
Front tread: 60 to 88 inches
152 to 223 cm
Rear tread: 64 to 89 inches
162 to 226 cm

Allis Chalmers 7010 Height
Steering wheel: 87 inches
220 cm
Hood: 68 inches
172 cm
Exhaust: 116 inches
294 cm

Allis Chalmers 7010 Tests

Nebraska Tractor Test 1345

Nebraska Tractor Test 1345
Diesel 20-speed 2WD
May 1 – 13, 1980
Link: Nebraska Tractor Test 1345 file
PTO performance
Power at rated engine speed: 106.53 hp
79.4 kW
Fuel use: 7.0 gal/hour
26.5 l/hour
Power at rated PTO speed: 107.52 hp
80.2 kW
Fuel use: 6.9 gal/hour
26.1 l/hour
Drawbar performance
Max power: 87.83 hp
65.5 kW
Fuel use: 7.0 gal/hour
26.5 l/hour
Gear 5SL used for power test.
Max pull: 9,426 lbs
4275 kg
Gear 1FL used for pull test.

Nebraska Tractor Test 1346

Nebraska Tractor Test 1346
Diesel 12-speed 2WD
May 2 – 14, 1980
Link: Nebraska Tractor Test 1346 file
PTO performance
Power at rated engine speed: 106.72 hp
79.6 kW
Fuel use: 7.0 gal/hour
26.5 l/hour
Power at rated PTO speed: 106.33 hp
79.3 kW
Fuel use: 6.9 gal/hour
26.1 l/hour
Drawbar performance
Max power: 89.10 hp
66.4 kW
Fuel use: 7.2 gal/hour
27.3 l/hour
Gear 2F used for power test.
Max pull: 9,516 lbs
4316 kg
Gear 3S used for pull test.


Is Allis Chalmers 7010 a good tractor?

The Allis Chalmers 7010 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers 7010 take?

Check out the Allis Chalmers 7010 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the 7010?

The Allis Chalmers 7010 was an agricultural tractor model made from 1980 – 1981

Where is the serial number on a Allis Chalmers 7010?

Lookup above pto shield

Leave a Comment