Allis Chalmers 7060

Allis Chalmers 7060 Technical Specifications

Allis Chalmers 7060 is a Row-Crop tractor that was produced by the John Deere between 1974 – 1981.

Below you will find detailed technical specifications for Allis Chalmers 7060 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 7060 Production

Manufacturer: Allis Chalmers
Type: Row-Crop tractor
Factory: West Allis, Wisconsin, USA
Total built: 7,796
Original price: $48,696
In 1978, serial number 6001, the Allis Chalmers model 7060 received the new Accousta Cab II with console shift, new seating, and new lighting. The tractor`s color changed from an orange chassis to black.

Allis Chalmers 7060 Power

Engine: 192 hp
143.2 kW
PTO (claimed): 161 hp
120.1 kW
Drawbar (tested): 141.67 hp
105.6 kW
PTO (tested): 161.51 hp
120.4 kW

Allis Chalmers 7060 Electrical

Ground: negative
Batteries: 2
  4 (optional)
Battery volts: 12

Allis Chalmers 7060 Mechanical

Chassis: 4×2 2WD
Final drives: inboard planetary
Steering: hydrostatic power
Brakes: differential power wet disc
Cab: Accousta cab standard, A/C optional. Accousta cab II available in 1978.
Transmissions: 20-speed partial power shift
  12-speed partial power shift


Type: closed center
Valves: 2 or 3
Pump flow: 22 gpm
83.3 lpm
Total flow: 45 gpm
170.3 lpm
Steering flow: 9.5 gpm
36.0 lpm

Tracktor Hitch

Rear Type: 3/2
Rear lift (at 24″/610mm): 6,680 lbs
3030 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 1000
  540/1000 (optional)

Allis Chalmers 7060 Engine detail

Engine Detail
Allis Chalmers 670I
intercooled turbocharged diesel
liquid-cooled Inline
Displacement: 426 ci
7.0 L
Bore/Stroke: 4.25×5.00 inches
108 x 127 mm
Power: 192 hp
143.2 kW
Air cleaner: dry with pre-cleaner
Compression: 16:1
Rated RPM: 2300
Firing order: 1-5-3-6-2-4
Starter volts: 12
Coolant capacity: 32 qts
30.3 L
Intake valve clearance: 0.015 inches
0.381 mm (hot)
Exhaust valve clearance: 0.015 inches
0.381 mm (hot)

Allis Chalmers 7060 Transmission overview

Engine Oil

Transmission: Allis-Chalmers Power Director
Type: partial power shift
Gears: 20 forward and 4 reverse
Oil capacity: 29.6 qts
28.0 L
Oil type:
Allis-Chalmers Power Fluid 821

The Power Director uses a gear shift, range shift, and the two-speed Power Director. The gear shift lever selects one of five forward gears, or reverse. The range shift lever selects between high and low ranges. The tractor must be stopped, and the clutch pedal used, to change the gear or range. Once in motion, the Power Director is operated by means of two foot switches that can be switched, on the move, without the clutch.

Allis Chalmers 7060 Dimensions

Wheelbase: 106 inches
269 cm
Length: 163 inches
414 cm
Width: 95.5 inches
242 cm
  119.5 inches
303 cm (optional long axle)
Ground clearance: 22 inches
55 cm (front axle)
  28 inches
71 cm (rear axle)
Rear axle: 3.75 inch diameter
95 mm
Rear axle: 4.00 inch diameter
101 mm

Allis Chalmers 7060 Weight
Shipping: 11,530 lbs
5230 kg
Operating: 13,990 lbs
6345 kg (Power Director)
  14,645 lbs
6642 kg (Power shift)
Ballasted: 20,560 lbs
9326 kg

Allis Chalmers 7060 Height
Steering wheel: 87 inches
220 cm
Hood: 69 inches
175 cm
Exhaust: 117 inches
297 cm

Allis Chalmers 7060 Tests

Nebraska Tractor Test 1167

Nebraska Tractor Test 1167
Diesel Power Director 2WD
October 30 – November 11, 1974
Link: Nebraska Tractor Test 1167 file
PTO performance
Power at rated engine speed: 161.51 hp
120.4 kW
Fuel use: 10.2 gal/hour
38.6 l/hour
Power at rated PTO speed: 160.44 hp
119.6 kW
Fuel use: 10.0 gal/hour
37.9 l/hour
Drawbar performance
Max power: 136.12 hp
101.5 kW
Fuel use: 10.0 gal/hour
37.9 l/hour
Gear 4-Slow-Hi used for power test.
Max pull: 17,370 lbs
7879 kg
Gear 1-Slow-Hi used for pull test.

Nebraska Tractor Test 1197

Nebraska Tractor Test 1197
Diesel Power Shift 2WD
November 5 – 19, 1975
Link: Nebraska Tractor Test 1197 file
PTO performance
Power at rated engine speed: 161.42 hp
120.4 kW
Fuel use: 10.2 gal/hour
38.6 l/hour
Power at rated PTO speed: 161.65 hp
120.5 kW
Fuel use: 10.1 gal/hour
38.2 l/hour
Drawbar performance
Max power: 141.67 hp
105.6 kW
Fuel use: 10.3 gal/hour
39.0 l/hour
Gear 1-High used for power test.
Max pull: 17,851 lbs
8097 kg
Gear 2-Low used for pull test.


Is Allis Chalmers 7060 a good tractor?

The Allis Chalmers 7060 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers 7060 take?

Check out the Allis Chalmers 7060 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the 7045

The Allis Chalmers 7060 was an agricultural tractor model made from 1974 – 1981

Leave a Comment