Allis Chalmers 8010 Row-Crop tractor Technical Specifications
Allis Chalmers 8010 is a Row-Crop tractor that was produced by the John Deere between 1982 – 1985.
Below you will find detailed technical specifications for Allis Chalmers 8010 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Allis Chalmers 8010 Production
Manufacturer: | |
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 1,832 |
Original price | $46,176 |
Engine: | 91.46 hp 68.2 kW |
PTO (tested) | 107.38 hp 80.1 kW |
Allis Chalmers 8010 Electrical
Charging system | alternator |
Charging amps | 100 |
Battery volts | 12 |
Allis Chalmers 8010 Mechanical
Drive | 4×2 2WD |
4×4 MFWD 4WD (optional) | |
Differential lock | foot-button |
Steering | hydrostatic power |
Differential hydraulic wet discs brakes | |
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
Capacity
Fuel | 60 gal 227.1 L |
25 gal (optional tank) 94.6 L | |
Rear diff. | 66.8 qts 63.2 L |
Hydraulics
Type | load-sensitive |
Valves | 2 or 3 |
Pump flow | 22 gpm 83.3 lpm |
13.5 gpm (transmission) 51.1 lpm | |
Total flow | 45 gpm 170.3 lpm |
Steering flow | 9.5 gpm 36.0 lpm |
Tracktor Hitch
Rear Type | II |
Rear lift (at 24″/610mm) | 6,680 lbs 3030 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
Allis Chalmers 8010 Engine detail
Engine Detail | |
Allis Chalmers 649T | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled inline | |
Displacement | 301 ci 4.9 L |
Bore/Stroke | 3.875×4.25 inches 98 x 108 mm |
Air cleaner | dry |
Compression | 15.5:1 |
Rated RPM | 2300 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 12 |
Oil capacity | 16 qts 15.1 L |
Coolant capacity | 26 qts 24.6 L |
Engine Oil |
Transmission | Allis-Chalmers Power Director |
Type | partial power shift |
Gears | 16 forward and 4 reverse |
Oil capacity | 29.6 qts 28.0 L |
Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
Allis Chalmers 8010 Dimensions
2WD Wheelbase | 106 inches 269 cm |
4WD Wheelbase | 96 inches 243 cm |
Length | 187 inches 474 cm |
Width | 92.6 inches 235 cm |
2WD Weight | 12,630 lbs 5728 kg |
4WD Weight | 13,600 lbs 6168 kg |
4WD 21 2WD} Clearance (front axle) | 17.5 inches 44 cm |
Clearance (rear axle) | 28 inches 71 cm |
Allis Chalmers 8010 Height | |
Hood | 69 inches 175 cm |
Cab | 114 inches 289 cm |
Exhaust | 113 inches 287 cm |
Allis Chalmers 8010 Tests
Nebraska Tractor Test 1446 | |
Diesel 12-speed 2WD August 30 – September 10, 1982 Link: Nebraska Tractor Test 1446 file | |
PTO performance | |
Power at rated engine speed | 107.38 hp 80.1 kW |
Fuel use | 7.3 gal/hour 27.6 l/hour |
Power at rated PTO speed | 109.55 hp 81.7 kW |
Fuel use | 7.3 gal/hour 27.6 l/hour |
Drawbar performance | |
Max power | 91.46 hp 68.2 kW |
Fuel use | 7.3 gal/hour 27.6 l/hour |
Gear 2F used for power test. | |
Max pull | 9,102 lbs 4128 kg |
Gear 3S used for pull test. |
FAQ
Is Allis Chalmers 8010 a good tractor?
The Allis Chalmers 8010 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.
How much oil does a Allis Chalmers 8010 take?
Check out the Allis Chalmers 8010 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Allis Chalmers made the ?
The Allis Chalmers 8010 was an agricultural tractor model made from 1982 – 1985
How much horsepower is a Allis Chalmers 8010?
The engine tested at 91.46 hp
68.2 kW drawbar and 107.38 hp
80.1 kW kW PTO horsepower.
How much does a Allis Chalmers 8010 tractor weight?
Depending on the engine type, the Allis Chalmers 8010 weight ranges from 12630 to 13600 pounds .
How much can a Allis Chalmers 8010 Pull?
The max pulling capacity of the Allis Chalmers 8010 tractors starts at 9,102 lbs
4128 kg but may be slightly higher depending on the trim.