Allis Chalmers 8030 Row-Crop tractor Technical Specifications
Allis Chalmers 8030 is a Row-Crop tractor that was produced by the John Deere between 1982 – 1985.
Below you will find detailed technical specifications for Allis Chalmers 8030 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Allis Chalmers 8030 Production
Manufacturer: | |
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 2,328 |
Original price | $52,398 |
Engine: | 115.22 hp 85.9 kW |
PTO (tested) | 133.75 hp 99.7 kW |
Allis Chalmers 8030 Electrical
Charging system | alternator |
Charging amps | 100 |
Battery volts | 12 |
Allis Chalmers 8030 Mechanical
Drive | 4×2 2WD |
4×4 MFWD 4WD (optional) | |
Differential lock | foot-button |
Steering | hydrostatic power |
Differential hydraulic wet discs brakes | |
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
Capacity
Fuel | 60 gal 227.1 L |
25 gal (optional tank) 94.6 L | |
Rear diff. | 66.8 qts 63.2 L |
Hydraulics
Type | closed-center load-sensitive |
Valves | 2 or 3 |
Pump flow | 22 gpm 83.3 lpm |
13.5 gpm (transmission) 51.1 lpm | |
Total flow | 45 gpm 170.3 lpm |
Steering flow | 9.5 gpm 36.0 lpm |
Tracktor Hitch
Rear Type | III/II |
Rear lift (at 24″/610mm) | 6,680 lbs 3030 kg |
8,200 lbs (optional) 3719 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
Title serial numbers
Location: | Above PTO shield |
1981 | 1001 |
1982 | 1009 |
1983 | 2093 |
1984 | 2701 |
1985 | 3146 |
Final | 3328 |
FAQ: How to read a serial number table. |
What year is my Allis Chalmers 8030? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
Allis Chalmers 8030 Engine detail
Engine Detail | |
Allis Chalmers 670T | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled inline | |
Displacement | 426 ci 7.0 L |
Bore/Stroke | 4.25×5.00 inches 108 x 127 mm |
Air cleaner | dry |
Compression | 15.5:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Oil capacity | 19 qts 18.0 L |
Coolant capacity | 31 qts 29.3 L |
Engine Oil |
Transmission | Allis-Chalmers Power Director |
Type | partial power shift |
Gears | 16 forward and 4 reverse |
Oil capacity | 29.6 qts 28.0 L |
Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
Allis Chalmers 8030 Dimensions
Wheelbase | 106 inches (2WD) 269 cm |
96 inches (4WD) 243 cm | |
Length | 187 inches 474 cm |
Width | 93.4 inches 237 cm |
Ground clearance | 17.5 inches (4WD front axle) 44 cm |
21 inches ( 2WD front axle) 53 cm | |
28 inches (rear axle) 71 cm |
Allis Chalmers 8030 Weight | |
Shipping | 14,200 lbs (4WD) 6441 kg |
Operating | 15,015 lbs (2WD duals) 6810 kg |
Ballasted | 17,100 lbs 7756 kg |
Allis Chalmers 8030 Height | |
Hood | 69 inches 175 cm |
Cab | 115 inches 292 cm |
Exhaust | 113 inches 287 cm |
Allis Chalmers 8030 Tests
Nebraska Tractor Test 1447 | |
Diesel 12-speed 2WD August 31 – September 13, 1982 Link: Nebraska Tractor Test 1447 file | |
PTO performance | |
Power at rated engine speed | 133.75 hp 99.7 kW |
Fuel use | 8.9 gal/hour 33.7 l/hour |
Power at rated PTO speed | 134.42 hp 100.2 kW |
Fuel use | 8.8 gal/hour 33.3 l/hour |
Drawbar performance | |
Max power | 115.22 hp 85.9 kW |
Fuel use | 8.9 gal/hour 33.7 l/hour |
Gear 2F used for power test. | |
Max pull | 13,348 lbs 6054 kg |
Gear 3S used for pull test. |
FAQ
Is Allis Chalmers 8030 a good tractor?
The Allis Chalmers 8030 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.
How much oil does a Allis Chalmers 8030 take?
Check out the Allis Chalmers 8030 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Allis Chalmers made the 8030?
The Allis Chalmers 8030 was an agricultural tractor model made from 1982 – 1985
How much horsepower is a Allis Chalmers 8030?
The 8030 engine tested at 115.22 hp
85.9 kW drawbar and 133.75 hp
99.7 kW kW PTO horsepower.
How much does a Allis Chalmers 8030 tractor weight?
Depending on the engine type, the Allis Chalmers 8030 weight ranges from 14200 to 15015 pounds .
How much can a Allis Chalmers 8030 Pull?
The max pulling capacity of the Allis Chalmers 8030 tractors starts at 13,348 lbs
6054 kg but may be slightly higher depending on the trim.
Where is the serial number on a Allis Chalmers 8030?
Lookup above pto shield