Allis Chalmers 8050 Row-Crop tractor Technical Specifications
Allis Chalmers 8050 is a Row-Crop tractor that was produced by the John Deere between 1982 – 1985.
Below you will find detailed technical specifications for Allis Chalmers 8050 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Allis Chalmers 8050 Production
Manufacturer: | |
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 2,336 |
Original price | $58,411 |
Engine: | 131.44 hp 98.0 kW |
PTO (tested) | 152.40 hp 113.6 kW |
Allis Chalmers 8050 Electrical
Charging system | alternator |
Charging amps | 100 |
Battery volts | 12 |
Allis Chalmers 8050 Mechanical
Two- or four-wheel drive | |
Differential lock | foot-button |
Steering | hydrostatic power |
Differential hydraulic wet discs brakes | |
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
Capacity
Fuel | 60 gal 227.1 L |
25 gal (optional tank) 94.6 L | |
Rear diff. | 66.8 qts 63.2 L |
Hydraulics
Type | closed-center load-sensitive |
Valves | 2 or 3 |
Pump flow | 22 gpm 83.3 lpm |
13.5 gpm (transmission) 51.1 lpm | |
Total flow | 45 gpm 170.3 lpm |
Steering flow | 9.5 gpm 36.0 lpm |
Tracktor Hitch
Rear Type | III/II |
Rear lift (at 24″/610mm) | 6680 lbs 3030 kg |
8200 lbsOptOptional 3719 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
1000 OptOptional |
Title serial numbers
Location: | Above PTO shield |
1981 | 1001 |
1982 | 1016 |
1983 | 1924 |
1984 | 2496 |
1985 | 3187 |
Final | 3336 |
FAQ: How to read a serial number table. |
What year is my Allis Chalmers 8050? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
Allis Chalmers 8050 Engine detail
Engine Detail | |
Allis Chalmers 670I | |
turbocharged intercooled diesel | |
6-cylinder | |
liquid-cooled inline | |
Displacement | 426 ci 7.0 L |
Bore/Stroke | 4.25×5.00 inches 108 x 127 mm |
Air cleaner | dry |
Compression | 15.5:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Oil capacity | 19 qts*With two oil filters 18.0 L |
21 qts*With three oil filters 19.9 L | |
Coolant capacity | 32 qts 30.3 L |
Engine Oil |
Transmission | Allis-Chalmers Power Director |
Type | partial power shift |
Gears | 20 forward and 4 reverse |
Oil capacity | 29.6 qts 28.0 L |
Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
Allis Chalmers 8050 Dimensions
2WD Wheelbase | 106 inches 269 cm |
4WD Wheelbase | 96 inches 243 cm |
Length | 187 inches 474 cm |
Width | 95.5 inches 242 cm |
119.5 inches (long axle) 303 cm | |
4WD Clearance (front axle) | 17.5 inches 44 cm |
2WD Clearance (front axle) | 22 inches 55 cm |
Clearance (rear axle) | 28 inches 71 cm |
Allis Chalmers 8050 Weight | |
2WD | 15305 lbs 6942 kg |
4WD | 16300 lbs 7393 kg |
Ballasted | 19380 lbs 8790 kg |
Allis Chalmers 8050 Height | |
Hood | 69 inches 175 cm |
Cab | 115 inches 292 cm |
Exhaust | 113 inches 287 cm |
Allis Chalmers 8050 Tests
Nebraska Tractor Test 1448 | |
Diesel 12-speed 2WD September 1 – 17, 1982 Link: Nebraska Tractor Test 1448 file | |
PTO performance | |
Power at rated engine speed | 152.40 hp 113.6 kW |
Fuel use | 9.7 gal/hour 36.7 l/hour |
Power at rated PTO speed | 155.15 hp 115.7 kW |
Fuel use | 9.8 gal/hour 37.1 l/hour |
Drawbar performance | |
Max power | 131.44 hp 98.0 kW |
Fuel use | 9.6 gal/hour 36.3 l/hour |
Gear 1F used for power test. | |
Max pull | 16,728 lbs 7587 kg |
Gear 2S used for pull test. |
FAQ
Is Allis Chalmers 8050 a good tractor?
The Allis Chalmers 8050 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.
How much oil does a Allis Chalmers 8050 take?
Check out the Allis Chalmers 8050 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Allis Chalmers made the 8050?
The Allis Chalmers 8050 was an agricultural tractor model made from 1982 – 1985
How much horsepower is a Allis Chalmers 8050?
The 8050 engine tested at 131.44 hp
98.0 kW drawbar and 152.40 hp
113.6 kW kW PTO horsepower.
How much does a Allis Chalmers 8050 tractor weight?
Depending on the engine type, the Allis Chalmers 8050 weight ranges from 15305 to 16300 pounds .
How much can a Allis Chalmers 8050 Pull?
The max pulling capacity of the Allis Chalmers 8050 tractors starts at 16,728 lbs
7587 kg but may be slightly higher depending on the trim.
Where is the serial number on a Allis Chalmers 8050?
Lookup above pto shield