Allis Chalmers D14 Row-Crop tractor Technical Specifications
Allis Chalmers D14 is a Row-Crop tractor that was produced by the John Deere between 1957 – 1960.
Below you will find detailed technical specifications for Allis Chalmers D14 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Allis Chalmers D14 Production
| Manufacturer: | |
| Manufacturer | Allis Chalmers |
| Row-Crop tractor | |
| Built in West Allis, Wisconsin, USA | |
| Total built | 23,050 |
| Original price was $2,900 in 1960 | |
| Engine: | 30.91 hp 23.0 kW |
| Belt (tested) | 34.08 hp 25.4 kW |
Allis Chalmers D14 Electrical
| Ground | positive |
| Battery volts | 6 |
Allis Chalmers D14 Mechanical
| Two-wheel drive | |
| Manual steering | |
| Mechanical expanding shoe brakes | |
| Open operator station. |
Tracktor Hitch
| Type | Allis Snap Coupler |
Power Take-off (PTO)
| Rear PTO | live *Hand clutch |
| Rear RPM | 540 |
Allis Chalmers D14 Engine detail
| Engine Detail | |
| Allis-Chalmers | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled vertical I-head | |
| Displacement | 149 ci 2.4 L |
| Bore/Stroke | 3.50×3.875 inches 89 x 98 mm |
| Fuel system | carburetor |
| Air cleaner | oil bath |
| Compression | 7.5:1 |
| Rated RPM | 1650 |
| Firing order | 1-2-4-3 |
| Starter volts | 6 |
| Coolant capacity | 9 qts 8.5 L |
| Sparkplug gap | 0.025 inches 0.635 mm |
| Point gap | 0.022 inches 0.559 mm |
| Intake valve clearance | 0.009 inches*Hot 0.229 mm |
| Exhaust valve clearance | 0.015 inches*Hot 0.381 mm |
| Engine Oil | |||
| Type | sliding gear |
| Gears | 4 forward and 1 reverse |
Allis Chalmers D14 Dimensions
| Wheelbase | 85.75 inches 217 cm |
| Length | 129 inches 327 cm |
| Height (hood) | 55.9 inches 141 cm |
| Height (exhaust) | 79.56 inches 202 cm |
| Operating weight | 3500 lbs 1587 kg |
| Ballasted weight | 7000 lbs 3175 kg |
| Ground clearance | 25 inches 63 cm |
| Front tread | 8.8/15.5 inches 22/39 cm*Tricycle |
| Rear tread | 54 to 80 inches 137 to 203 cm |
Allis Chalmers D14 Tests
| Nebraska Tractor Test 623 | |
| Gasoline 8-speed 2WD June 1 – 7, 1957 Link: Nebraska Tractor Test 623 file | |
| Belt power (max) | 34.08 hp 25.4 kW |
| Belt fuel use (max) | 3.0 gal/hour 11.4 l/hour |
| Drawbar performance | |
| Max power | 30.91 hp 23.0 kW |
| Gear 3 used for power test. | |
| Max pull | 4,847 lbs 2198 kg |
| Gear 1D used for pull test. | |
| Nebraska Tractor Test 645 | |||
| Nebraska Tractor Test 645 | |
| LP gas 8-speed 2WD April 1 – 12, 1958 Link: Nebraska Tractor Test 645 file | |
| Belt power (max) | 31.86 hp 23.8 kW |
| Belt fuel use (max) | 3.7 gal/hour 14.0 l/hour |
| Drawbar performance | |
| Max power | 28.67 hp 21.4 kW |
| Gear 3D used for power test. | |
| Max pull | 5,023 lbs 2278 kg |
| Gear 1D used for pull test. | |
FAQ
Is Allis Chalmers D14 a good tractor?
The Allis Chalmers D14 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.
How much oil does a Allis Chalmers D14 take?
Check out the Allis Chalmers D14 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Allis Chalmers made the ?
The Allis Chalmers D14 was an agricultural tractor model made from 1957 – 1960
How much does a Allis Chalmers D14 tractor weight?
Depending on the engine type, the Allis Chalmers D14 weight ranges from 3500 lbs
1587 kg .
How much can a Allis Chalmers D14 Pull?
The max pulling capacity of the Allis Chalmers D14 tractors starts at 4,847 lbs
2198 kg but may be slightly higher depending on the trim.