Allis Chalmers ED40 Specs & Features

Contents show

Allis Chalmers ED40 Technical Specifications

Allis Chalmers ED40 is a Row-Crop tractor that was produced by the John Deere between 1960 – 1968.

Below you will find detailed technical specifications for Allis Chalmers ED40 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers ED40 Production

Manufacturer:
Manufacturer:	Allis Chalmers
Type:	Utility tractor
Factory:	Essendine, Lincolnshire, England

Allis Chalmers ED40 Mechanical

Chassis:

4×2 2WD

Differential lock:

mechanical rear

Steering:

manual

Brakes:

mechanical drum

Cab:

Open operator station.

Transmission:

8-speed gear

Hydraulics

Type:	open center
Pressure:	2500 psi 172.4 bar
Pump flow:	6.4 gpm 24.2 lpm

Tracktor Hitch

Rear Type:	I
Rear lift (at ends):	2500 lbs 1134 kg

Power Take-off (PTO)

Rear PTO:	live*Optional
Rear RPM:	540 (1.375)
Engine RPM:	540@1700

Allis Chalmers ED40 Engine detail

Engine Detail
Standard Ricardo 23C
diesel
4-cylinder
liquid-cooled
Displacement:	137.89 ci 2.3 L
Bore/Stroke:	3.3125×4.00 inches 84 x 102 mm
Power:	37 hp 27.6 kW
Pre-heating:	glow plugs
Rated RPM:	2000
Starter volts:	12

Allis Chalmers ED40 Transmission overview

Engine Oil

Type:	gear
Gears:	8 forward and 2 reverse
Clutch:	254mm dry disc
Oil capacity:	32.4 qts 30.7 L

Allis Chalmers ED40 Dimensions

Wheelbase:	76.4 inches 194 cm
Length:	114 inches 289 cm
Width:	63 inches 160 cm *Minimum width.
Height (hood):	57.1 inches 145 cm
Height (exhaust):	68 inches 172 cm
Weight:	3527 lbs 1599 kg
Front tread:	48 to 70 inches 121 to 177 cm
Rear tread:	48 to 72 inches 121 to 182 cm

FAQ

Is Allis Chalmers ED40 a good tractor?

The Allis Chalmers ED40 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers ED40 take?

Check out the Allis Chalmers ED40 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the ?

The Allis Chalmers ED40 was an agricultural tractor model made from 1960 – 1968

How much can a Allis Chalmers ED40 Pull?

The max pulling capacity of the Allis Chalmers ED40 tractors starts at 4,847 lbs
2198 kg but may be slightly higher depending on the trim.