Allis Chalmers HD3 Specs & Features

Contents show

Allis Chalmers HD3 Technical Specifications

Allis Chalmers HD3 is a Row-Crop tractor that was produced by the John Deere between 1960 – 1968.

Below you will find detailed technical specifications for Allis Chalmers HD3 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers HD3 Production

Manufacturer:
Manufacturer:	Allis Chalmers
Type:	Agricultural Crawler tractor
Factory:	Springfield, Illinois, USA
The Allis-Chalmers H3 crawler was based on the diesel-powered D15 farm tractor.

Allis Chalmers HD3 Power

Engine:
Drawbar (tested):	26.17 hp 19.5 kW
PTO (tested):	32.53 hp 24.3 kW

Allis Chalmers HD3 Mechanical

Chassis:

crawler

Steering:

mechanical clutches

Brakes:

mechanical contracting band

Cab:

Open operator station.

Transmissions:

8-speed two-speed power shift

4-speed mechanical shuttle

Capacity

Fuel:	14 gal 53.0 L
Hydraulic system:	16.5 gal 62.5 L

Hydraulics

Type:	open center
Capacity:	16.5 gal 62.5 L
Valves:	1 to 3
Pump flow:	15 gpm 56.8 lpm
	25 gpm 94.6 lpm (optional)

Power Take-off (PTO)

Rear PTO:	optional
Rear RPM:	540

Allis Chalmers HD3 Engine detail

Engine Detail
Allis Chalmers
diesel
4-cylinder
liquid-cooled
Displacement:	175 ci 2.9 L
Bore/Stroke:	3.562×4.375 inches 90 x 111 mm
Fuel system:	Roosa-Master injection pump
Air cleaner:	oil bath
Rated RPM:	1650
Starter:	electric
Starter volts:	12
Coolant capacity:	9 qts 8.5 L

Allis Chalmers HD3 Transmission overview

Engine Oil

Transmission:	Power Director
Type:	two-speed power shift
Gears:	8 forward and 2 reverse
Clutch:	wet disc (Power Director)
	dry disc (gear)
Four gears (1-4) plus reverse (R) with two-speed high/low power shift.

Allis Chalmers HD3 Dimensions

Length:	108.75 inches 276 cm
Height (hood):	48.3 inches 122 cm
Height (exhaust):	71.7 inches 182 cm
Weight:	7645 lbs 3467 kg
Gauge:	48 inches 121 cm

Allis Chalmers HD3 Tests

Nebraska Tractor Test 794

Nebraska Tractor Test 794
Diesel 8-speed crawler May 12 – 26, 1961 Link: Nebraska Tractor Test 794 file
PTO performance
Power at rated engine speed:	32.53 hp 24.3 kW
Fuel use:	2.6 gal/hour 9.8 l/hour
Drawbar performance
Max power:	26.17 hp 19.5 kW
Fuel use:	2.6 gal/hour 9.8 l/hour
Gear 2H used for power test.
Max pull:	8207 lbs 3722 kg
Gear 1L used for pull test.

FAQ

Is Allis Chalmers HD3 a good tractor?

The Allis Chalmers HD3 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers HD3 take?

Check out the Allis Chalmers HD3 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the ?

The Allis Chalmers HD3 was an agricultural tractor model made from 1960 – 1968