
Branson 4225H Technical Specifications
Branson 4225H is a Row-Crop tractor that was produced by the John Deere between 2017 – .
Below you will find detailed technical specifications for Branson 4225H covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Branson 4225H Production
Manufacturer: |
Manufacturer: |
Branson (a part of Kukje)
|
Type: |
Compact Utility tractor
|
Branson 4225H Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
70
|
Battery volts: |
12
|
Branson 4225H Mechanical
Chassis: |
4×4 MFWD 4WD
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Brakes: |
wet disc
|
Cab: |
Two-post folding ROPS.
|
Transmission: |
hydrostatic
|
Capacity
Fuel: |
12 gal 45.4 L
|
Hydraulic system: |
10 gal 37.9 L
|
Hydraulics
Type: |
open center
|
Capacity: |
10 gal 37.9 L
|
Pressure: |
2100 psi 144.8 bar
|
Pump flow: |
10.4 gpm 39.4 lpm
|
Total flow: |
15.4 gpm 58.3 lpm
|
Steering flow: |
5 gpm 18.9 lpm
|
Tracktor Hitch
Rear Type: |
I
|
Control: |
position control
|
Rear lift (at ends): |
3306 lbs 1499 kg
|
Rear lift (at 24″/610mm): |
2420 lbs 1097 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
electro-hydraulic wet disc
|
Rear RPM: |
540/540E (1.375)
|
Engine RPM: |
540@2500 540E@2000
|
Branson 4225H Engine detail
Engine Detail |
Kukje A2000N2-UTR4 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
127.2 ci 2.1 L
|
Bore/Stroke: |
3.31×3.70 inches 84 x 94 mm
|
Emissions: |
Tier IV
|
Air cleaner: |
dual dry element
|
Compression: |
21:1
|
Rated RPM: |
2600
|
Starter: |
electric
|
Starter volts: |
12
|
Oil capacity: |
7 qts 6.6 L
|
Coolant capacity: |
6.4 qts 6.1 L
|
Engine Oil |
Branson 4225H Transmission overview
Type: |
hydrostatic
|
Gears: |
infinite (3-range) forward and reverse
|
Oil capacity: |
40 qts 37.9 L
|
Branson 4225H Dimensions
Wheelbase: |
71.1 inches 180 cm
|
Length: |
129 inches 327 cm
|
Width: |
60.2 inches 152 cm
|
Height (ROPS): |
96 inches 243 cm
|
Shiping weight: |
4153 lbs 1883 kg
|
Ground clearance: |
13.1 inches 33 cm
|
FAQ
Is Branson 4225H a good tractor?
The Branson 4225H is one of the great tractors in the Branson (a part of Kukje) stable, and it has earned Branson (a part of Kukje) a fantastic reputation.
How much oil does a Branson 4225H take?
Check out the Branson 4225H oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Branson (a part of Kukje) made the 3725H
The Branson 4225H was an agricultural tractor model made from 2017 –
|