CaseIH 2120

CaseIH 2120 Orchard/Vineyard tractor Technical Specifications

CaseIH 2120 is a Row-Crop tractor that was produced by the John Deere between 1988 – 1993.

Below you will find detailed technical specifications for CaseIH 2120 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH 2120 Production

Distributor: CaseIH
Manufacturer: Carraro
Type: Orchard/Vineyard tractor

CaseIH 2120 Electrical

Ground: negative
Charging system: alternator
Charging amps: 55
Battery volts: 12
Battery AH: 100

CaseIH 2120 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Steering: hydrostatic power
Brakes: wet disc
Trailer brakes: hydraulic*Optional.
Cab: Two-post forward-folding ROPS. Cab optional.
Transmissions: 8-speed partially synchronized
  12-speed partially synchronized


Type: open center
Valves: 1 or 2
Pump flow: 15.6 gpm
59.0 lpm

Tracktor Hitch

Rear Type: I/II
Control: position and draft control
2120V Rear lift (at ends): 5575 lbs
2528 kg
2120E Rear lift (at ends): 5463 lbs
2478 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540 (1.375)
Engine RPM: 540@2115

Title serial numbers

Location: Serial number plate on the right side of tractor`s console.

What year is my CaseIH 2120? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

CaseIH 2120 Engine detail

Engine Detail
SLH 100.3.A
Displacement: 183.1 ci
3.0 L
Bore/Stroke: 4.134×4.547 inches
105 x 115 mm
Air cleaner: dual dry element
Compression: 17:1
Rated RPM: 2350
Torque: 115.1 lb-ft
156.1 Nm
Torque RPM: 1200
Firing order: 1-3-2
Starter: electric
Starter volts: 12
Oil capacity: 7.1 qts
6.7 L
Intake valve clearance: 0.008 inches
0.203 mm *Cold.
Exhaust valve clearance: 0.008 inches
0.203 mm *Cold.

CaseIH 2120 Transmission overview

Engine Oil

Type: partially synchronized
Gears: 8 forward and reverse
Clutch: 280mm dry disc
2WD Oil capacity: 38 qts
36.0 L
4WD Oil capacity: 40.2 qts
38.0 L
Four synchronized gears (1-4) in two ranges (I/II) with right-hand mechanical shuttle lever. Clutch must be used to shift direction or gear. Tractor must be stopped, and clutch used, to shift range.

CaseIH 2120 Dimensions

2WD Wheelbase: 78 inches
198 cm
4WD Wheelbase: 76.6 inches
194 cm
2120V Length: 132.3 inches
336 cm
2120E Length: 132.9 inches
337 cm
2120V Width: 47.8 inches
121 cm
2120E Width: 53.7 inches
136 cm
Height (hood): 52.1 inches
132 cm
Height (ROPS): 92.7 inches
235 cm
2WD Ground clearance: 13.6 inches
34 cm
4WD Ground clearance: 9.9 inches
25 cm

CaseIH 2120 Weight
2120V 2WD : 4101 lbs
1860 kg
2130E 2WD : 4167 lbs
1890 kg
2120V 4WD : 4431 lbs
2009 kg
2120E 4WD : 4542 lbs
2060 kg


Is CaseIH 2120 a good tractor?

The CaseIH 2120 is one of the great tractors in the Carraro stable, and it has earned Carraro a fantastic reputation.

How much oil does a CaseIH 2120 take?

Check out the CaseIH 2120 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Carraro made the 2120?

The CaseIH 2120 was an agricultural tractor model made from 1988 – 1993

Where is the serial number on a CaseIH 2120?

Lookup serial number plate on the right side of tractor`s console.

Leave a Comment