CaseIH 4230 Utility tractor Technical Specifications
CaseIH 4230 is a Row-Crop tractor that was produced by the John Deere between 1994 – 1997.
Below you will find detailed technical specifications for CaseIH 4230 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
CaseIH 4230 Production
Manufacturer: |
Manufacturer: |
CaseIH
|
Type: |
Utility tractor
|
Factory: |
Doncaster, England
|
Original price: |
$30,000 (1997)
|
CaseIH 4230 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
45
|
|
65 (cab, ROPS opt.)
|
Battery CCA: |
650
|
|
810 (optional)
|
Battery volts: |
12
|
CaseIH 4230 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Differential lock: |
mechanical (ROPS)
|
|
electro-hydraulic (cab)
|
Steering: |
hydrostatic power
|
Brakes: |
hydraulic wet disc
|
Cab: |
Two-post ROPS. Cab optional with air-conditioning.
|
Transmissions: |
8-speed synchromesh
|
|
8-speed shuttle
|
|
16-speed partial power shift
|
|
16-speed synchromesh creeper
|
Capacity
Fuel: |
20 gal
75.7 L (ROPS)
|
|
29.6 gal
112.0 L (cab)
|
Hydraulic system: |
9 gal
34.1 L (2WD)
|
|
9.7 gal
36.7 L (cab)
|
Hydraulics
Type: |
open center
|
Capacity: |
9 gal
34.1 L (2WD)
|
|
9.7 gal
36.7 L (cab)
|
Pressure: |
2500 psi
172.4 bar
|
Valves: |
0 to 3
|
Total flow: |
16.1 gpm
60.9 lpm
|
|
18.4 gpm
69.6 lpm (optional)
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
draft and position control
|
Rear lift: |
3,665 lbs
1662 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
hydraulic wet disc
|
Rear RPM: |
540
|
|
540/1000 (optional)
|
CaseIH 4230 Engine detail
Engine Detail |
Case D269 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
268 ci
4.4 L
|
Power (gross): |
84 hp
62.6 kW
|
Air cleaner: |
dry
|
Pre-heating: |
thermostart (optional)
|
|
ether (optional)
|
Rated RPM: |
2400
|
Starter volts: |
12
|
Oil capacity: |
10.4 qts
9.8 L
|
Oil change: |
200 h
|
Coolant capacity: |
14.5 qts
13.7 L
|
Engine Oil |
CaseIH 4230 Transmission overview
Type: |
synchromesh
|
Gears: |
8 forward and 4 reverse
|
Clutch: |
12-inch dry cerametallic
|
Oil capacity: |
35.9 qts
34.0 L (2WD)
|
|
38.6 qts
36.5 L (4WD)
|
Four gears (1-4) in two ranges (L/H) plus reverse range. |
CaseIH 4230 Dimensions
Wheelbase: |
88.7 inches
225 cm (2WD)
|
|
88 inches
223 cm (4WD)
|
Front tread: |
52 to 77 inches
132 to 195 cm (2WD straight)
|
Front tread: |
48 to 80 inches
121 to 203 cm (2WD sweptback)
|
Front tread: |
52 to 80 inches
132 to 203 cm (2WD low)
|
Front tread: |
52 to 77 inches
132 to 195 cm (2WD low-low)
|
Front tread: |
88 to 96 inches
223 to 243 cm (tobacco)
|
CaseIH 4230 Weight |
Shipping: |
6,687 lbs
3033 kg (2WD ROPS)
|
|
7,395 lbs
3354 kg (2WD ROPS)
|
Max capacity: |
10,150 lbs
4604 kg (ROPS)
|
|
12,125 lbs
5499 kg (cab)
|
FAQ
Is CaseIH 4230 a good tractor?
The CaseIH 4230 is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.
How much oil does a CaseIH 4230 take?
Check out the CaseIH 4230 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year CaseIH made the 4210
The CaseIH 4230 was an agricultural tractor model made from 1994 – 1997
|
