CaseIH Farmall 115C Utility tractor Specs & Features

Contents show

CaseIH Farmall 115C Utility tractor Technical Specifications

CaseIH Farmall 115C is a Row-Crop tractor that was produced by the John Deere between 2013 – 2015.

Below you will find detailed technical specifications for CaseIH Farmall 115C covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 115C Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Utility tractor

CaseIH Farmall 115C Power

Engine:
Engine:	115 hp 85.8 kW
PTO (claimed):	98 hp 73.1 kW
Drawbar (tested):	69.3 hp 51.7 kW
PTO (tested):	103.7 hp 77.3 kW

CaseIH Farmall 115C Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	120
ROPS Battery CCA:	730
Cab Battery CCA:	800
Battery volts:	121

CaseIH Farmall 115C Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

inboard planetary

Differential lock:

mechanical rear

Steering:

power

ROPS Brakes:

mechanical wet disc

Cab Brakes:

hydraulic wet disc

Cab:

Two-post foldable ROPS. Cab optional with heat and air-conditioning.

Transmissions:

12-speed mechanical shuttle

12-speed power shuttle

20-speed creeper

Hydraulics

Type:	open center
Valves:	1 or 2
Pump flow:	12.9 gpm 48.8 lpm
	16.9 gpm 64.0 lpm *Optional

Tracktor Hitch

Rear Type:	II
Control:	mechanical upper-link draft sensing
Rear lift (at 24″/610mm):	5620 lbs 2549 kg
Drawbar:	swinging drawbar

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540 (1.375)
	540/1000*Optional

CaseIH Farmall 115C Engine detail

Engine Detail
Fiat Powertrain Technologies (FPT) F5H
turbocharged air-to-air aftercooled diesel
4-cylinder
liquid-cooled
Displacement:	207 ci 3.4 L
Bore/Stroke:	3.90×4.33 inches 99 x 110 mm
Emissions:	Interim Tier 4
Emission control:	cooled exhaust-gas recirculation (EGR)
Power:	115 hp 85.8 kW
Fuel system:	electronic high-pressure common rail direct injection
Air cleaner:	dual dry element
Pre-heating:	grid heater
Rated RPM:	2300
Starter:	electric
Starter volts:	12

CaseIH Farmall 115C Transmission overview

Engine Oil

Type:	mechanical shuttle
Gears:	12 forward and reverse
Four synhronized gears in three non-synchronized ranges. Mechanical shuttle shifting.

CaseIH Farmall 115C Dimensions

4WD Wheelbase:	89 inches 226 cm
Length:	149 inches 378 cm
Width:	83 inches 210 cm
Height (ROPS):	103 inches 261 cm
Height (cab):	100 inches 254 cm
4WD Cab Weight:	7937 lbs 3600 kg
Rear axle:	Flange axle
2WD Front tread:	60.2 to 79.9 inches 152 to 202 cm
4WD Front tread:	60.8 to 76.6 inches 154 to 194 cm
Rear tread:	52.2 to 76.6 inches 132 to 194 cm

CaseIH Farmall 115C Tests

OCED Tractor Test 2839

OCED Tractor Test 2839
Diesel 12-speed 4WD Cab March 2014 – April 2014, Link: OCED Tractor Test 2839 file
PTO performance
Max power:	103.7 hp 77.3 kW
Fuel use:	5.9 gal/hour 22.3 l/hour
Power at rated engine speed:	98.7 hp 73.6 kW
Fuel use:	6.2 gal/hour 23.5 l/hour
Power at rated PTO speed:	100.4 hp 74.9 kW
Fuel use:	6.1 gal/hour 23.1 l/hour
Drawbar performance
Max power:	69.3 hp 51.7 kW
Fuel use:	5.6 gal/hour 21.2 l/hour
Gear 3M used for power test.
Max pull:	6775 lbs 3073 kg
Gear 2M used for pull test.

FAQ

Is CaseIH Farmall 115C a good tractor?

The CaseIH Farmall 115C is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH Farmall 115C take?

Check out the CaseIH Farmall 115C oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the Farmall 105C

The CaseIH Farmall 115C was an agricultural tractor model made from 2013 – 2015