CaseIH Farmall 50A

CaseIH Farmall 50A Utility tractor Technical Specifications

CaseIH Farmall 50A is a Row-Crop tractor that was produced by the John Deere between 2015 – .

Below you will find detailed technical specifications for CaseIH Farmall 50A covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 50A Production

Manufacturer: CaseIH
Type: Utility tractor
Factory: India

CaseIH Farmall 50A Power

Engine (gross): 50 hp
37.3 kW
PTO (claimed): 46 hp
34.3 kW
PTO (tested): 46.39 hp
34.6 kW

CaseIH Farmall 50A Electrical

Ground: negative
Charging system: alternator
Charging amps: 75
Battery volts: 12

CaseIH Farmall 50A Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Final drives: planetary
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post folding ROPS.
Transmission: 8-speed mechanical shuttle


Type: open center
Rear valves: 1 or 2
Mid valves: 0 or 2
Pump flow: 11.9 gpm
45.0 lpm
Steering flow: 5.5 gpm
20.8 lpm

Tracktor Hitch

Rear Type: II
Rear lift (at 24″/610mm): 2701 lbs
1225 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540 (1.375)
Engine RPM: 540@2575

CaseIH Farmall 50A Engine detail

Engine Detail
turbocharged aftercooled diesel
3-cylinder 6-valve
Displacement: 135.9 ci
2.2 L
Bore/Stroke: 3.70×4.21 inches
94 x 107 mm
Emissions: Tier IV
Power (gross): 50 hp
37.3 kW
Fuel system: electronic high-pressure common rail
Air cleaner: dry
Pre-heating: glow plugs
Compression: 17.5:1
Rated RPM: 2600
Starter: electric
Starter volts: 12

CaseIH Farmall 50A Transmission overview

Engine Oil

Type: mechanical shuttle
Gears: 8 forward and reverse
Clutch: 279mm mechanical dry disc
Four gears in two ranges with shuttle.

CaseIH Farmall 50A Dimensions

2WD Wheelbase: 96.4 inches
244 cm
4WD Wheelbase: 97.6 inches
247 cm
2WD Length: 129.5 inches
328 cm
4WD Length: 134 inches
340 cm
Width: 67.5 inches
171 cm
2WD Height: 92.7 inches
235 cm
4WD Height: 97.4 inches
247 cm
2WD Weight: 4442 lbs
2014 kg
4WD Weight: 5060 lbs
2295 kg
Rear axle: Flange: 53.9 inch length
1369 mm
2WD Front tread: 56 to 77.6 inches
142 to 197 cm
4WD Front tread: 61.3 to 69.2 inches
155 to 175 cm
Rear tread: 52.6 to 68.4 inches
133 to 173 cm

CaseIH Farmall 50A Tests

Nebraska Tractor Test 2190

Nebraska Tractor Test 2190
Diesel 8-speed 4WD
February 20 – 21, 2018
Link: Nebraska Tractor Test 2190 file
PTO performance
Power at rated engine speed: 46.39 hp
34.6 kW
Fuel use: 3.7 gal/hour
14.0 l/hour
Power at rated PTO speed: 46.56 hp
34.7 kW
Fuel use: 3.7 gal/hour
14.0 l/hour


Is CaseIH Farmall 50A a good tractor?

The CaseIH Farmall 50A is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH Farmall 50A take?

Check out the CaseIH Farmall 50A oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the Farmall 50A?

The CaseIH Farmall 50A was an agricultural tractor model made from 2015 –

Leave a Comment