Challenger 75 Technical Specifications
Challenger 75 is a Row-Crop tractor that was produced by the John Deere between 1991 – 1992.
Below you will find detailed technical specifications for Challenger 75 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Challenger 75 Production
Manufacturer: | |
Manufacturer | Challenger (a part of Caterpillar) |
Agricultural Crawler tractor |
Engine: | 251.01 hp 187.2 kW |
PTO (tested) | 301.85 hp 225.1 kW |
Challenger 75 Mechanical
Drive | crawler |
Steering | hydrostatic differential steering |
Hydraulic caliper disc brakes | |
Cab standard |
Hydraulics
Type | closed |
Valves | 4 |
Pump flow | 26 gpm 98.4 lpm |
Tracktor Hitch
Rear Type | III,IV |
Power Take-off (PTO)
Rear RPM | 1000 |
Challenger 75 Engine detail
Engine Detail | |
Caterpillar | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 629 ci 10.3 L |
Bore/Stroke | 4.92×5.5 inches 125 x 140 mm |
Power | 325 hp 242.4 kW |
Compression | 16:1 |
Rated RPM | 2100 |
Starter volts | 12 |
Coolant capacity | 44 qts 41.6 L |
Engine Oil |
Type | full power shift |
Gears | 10 forward and 2 reverse |
Challenger 75 Dimensions
Wheelbase | 106 inches 269 cm |
Operating weight | 34,370 lbs 15590 kg |
Challenger 75 Tests
OCED Tractor Test 1654 | |
Diesel 10-speed crawler October 4 – 11, 1991 Link: OCED Tractor Test 1654 file | |
PTO performance | |
Max power | 301.85 hp 225.1 kW |
Fuel use | 16.2 gal/hour 61.3 l/hour |
Power at rated engine speed | 281.36 hp 209.8 kW |
Fuel use | 15.6 gal/hour 59.0 l/hour |
Power at rated PTO speed | 285.55 hp 212.9 kW |
Fuel use | 15.7 gal/hour 59.4 l/hour |
Drawbar performance | |
Max power | 251.01 hp 187.2 kW |
Fuel use | 15.7 gal/hour 59.4 l/hour |
Gear 3 used for power test. | |
Max pull | 34,309 lbs 15562 kg |
Gear 1 used for pull test. |
FAQ
Is Challenger 75 a good tractor?
The Challenger 75 is one of the great tractors in the Challenger (a part of Caterpillar) stable, and it has earned Challenger (a part of Caterpillar) a fantastic reputation.
How much oil does a Challenger 75 take?
Check out the Challenger 75 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Challenger (a part of Caterpillar) made the 75?
The Challenger 75 was an agricultural tractor model made from 1991 – 1992
How much horsepower is a Challenger 75?
The 75 engine tested at 251.01 hp
187.2 kW drawbar and 301.85 hp
225.1 kW kW PTO horsepower.
How much does a Challenger 75 tractor weight?
Depending on the engine type, the Challenger 75 weight ranges from 34,370 lbs
15590 kg .
How much can a Challenger 75 Pull?
The max pulling capacity of the Challenger 75 tractors starts at 34,309 lbs
15562 kg but may be slightly higher depending on the trim.