Challenger 95E Technical Specifications
Challenger 95E is a Row-Crop tractor that was produced by the John Deere between 1998 – 2001.
Below you will find detailed technical specifications for Challenger 95E covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Challenger 95E Production
| Manufacturer: | |
| Manufacturer | Challenger (a part of Caterpillar) |
| Agricultural Crawler tractor | |
| Original price | $238,000 |
| Engine: | 327.74 hp 244.4 kW |
| PTO (tested) | 341.88 hp 254.9 kW |
Challenger 95E Mechanical
| Drive | crawler |
| Steering | hydrostatic differential steering |
| Hydraulic caliper disc brakes | |
| Cab standard | |
Hydraulics
| Type | closed center |
| Valves | 4 |
| Total flow | 40 gpm 151.4 lpm |
Power Take-off (PTO)
| Rear RPM | 1000 |
Challenger 95E Engine detail
| Engine Detail | |
| Caterpillar | |
| turbocharged intercooled diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 729 ci 11.9 L |
| Bore/Stroke | 5.118×5.906 inches 130 x 150 mm |
| Power | 410 hp 305.7 kW |
| Air cleaner | dual paper elements with aspirator |
| Compression | 16:1 |
| Rated RPM | 2100 |
| Starter volts | 12 |
| Coolant capacity | 80 qts 75.7 L |
| Engine Oil | |||
| Type | full power shift |
| Gears | 10 forward and 2 reverse |
Challenger 95E Dimensions
| Wheelbase | 107 inches 271 cm |
| Operating weight | 35,520 lbs 16111 kg |
Challenger 95E Tests
| OCED Tractor Test 1751 | |
| Diesel 10-speed crawler May 19 – June 2, 1998 Link: OCED Tractor Test 1751 file | |
| PTO performance | |
| Max power | 341.88 hp 254.9 kW |
| Fuel use | 16.8 gal/hour 63.6 l/hour |
| Power at rated engine speed | 305.95 hp 228.1 kW |
| Fuel use | 16.1 gal/hour 60.9 l/hour |
| Power at rated PTO speed | 306.34 hp 228.4 kW |
| Fuel use | 15.9 gal/hour 60.2 l/hour |
| Drawbar performance | |
| Max power | 327.74 hp 244.4 kW |
| Fuel use | 19.2 gal/hour 72.7 l/hour |
| Gear 5 used for power test. | |
| Max pull | 35,202 lbs 15967 kg |
| Gear 1 used for pull test. | |
FAQ
Is Challenger 95E a good tractor?
The Challenger 95E is one of the great tractors in the Challenger (a part of Caterpillar) stable, and it has earned Challenger (a part of Caterpillar) a fantastic reputation.
How much oil does a Challenger 95E take?
Check out the Challenger 95E oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Challenger (a part of Caterpillar) made the 95E?
The Challenger 95E was an agricultural tractor model made from 1998 – 2001
How much horsepower is a Challenger 95E?
The 95E engine tested at 327.74 hp
244.4 kW drawbar and 341.88 hp
254.9 kW kW PTO horsepower.
How much does a Challenger 95E tractor weight?
Depending on the engine type, the Challenger 95E weight ranges from 35,520 lbs
16111 kg .
How much can a Challenger 95E Pull?
The max pulling capacity of the Challenger 95E tractors starts at 35,202 lbs
15967 kg but may be slightly higher depending on the trim.