Challenger MT335B

Challenger MT335B Utility tractor Technical Specifications

Challenger MT335B is a Row-Crop tractor that was produced by the John Deere between 2006 – 2009.

Below you will find detailed technical specifications for Challenger MT335B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Challenger MT335B Production








Manufacturer:
Manufacturer: Challenger (a part of AGCO)
Type: Utility tractor


Challenger MT335B Electrical
















Ground: negative
Charging system: alternator
Charging amps: 80
Battery CCA: 675
Battery volts: 12

Challenger MT335B Mechanical



























Chassis: 4×2 2WD
  4×4 MFWD 4WD
Differential lock: electro-hydraulic
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Two-post folding ROPS. Cab with air-conditioning optional.
Transmissions: 12-speed synchronized shuttle
  12-speed power shuttle

Hydraulics



















Type: open center
Pressure: 2755 psi
190.0 bar
Rear valves: 2 or 3
Mid valves: 0 or 2
SCV flow: 15.8 gpm
59.8 lpm
Total flow: 22.4 gpm
84.8 lpm

Tracktor Hitch










Rear Type: I/II
Control: position and draft control
Rear lift (at ends): 5500 lbs
2494 kg

Power Take-off (PTO)













Rear PTO: independent
Clutch: electro-hydraulic
Rear RPM: 540
  540/540E*Optional.

Challenger MT335B Engine detail

























Engine Detail
Challenger
turbocharged diesel
3-cylinder
liquid-cooled
Displacement: 201.4 ci
3.3 L
Bore/Stroke: 4.13×5.00 inches
105 x 127 mm
Power (gross): 78 hp
58.2 kW
Rated RPM: 2150
Starter volts: 12



Challenger MT335B Transmission overview

Engine Oil








Type: synchronized shuttle
Gears: 12 forward and reverse
Four gears in three ranges with mechanical shuttle.

Challenger MT335B Dimensions
















Wheelbase: 82.7 inches
210 cm
Length: 148 inches
375 cm
Width: 76 inches
193 cm
Height (ROPS): 105 inches
266 cm
Height (cab): 102.5 inches
260 cm













Challenger MT335B Weight
  5,291 lbs
2399 kg (2WD ROPS)
  5,732 lbs
2600 kg (4WD ROPS)
  7,716 lbs
3499 kg (4WD cab)

FAQ

Is Challenger MT335B a good tractor?

The Challenger MT335B is one of the great tractors in the Challenger (a part of AGCO) stable, and it has earned Challenger (a part of AGCO) a fantastic reputation.

How much oil does a Challenger MT335B take?

Check out the Challenger MT335B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Challenger (a part of AGCO) made the MT325B

The Challenger MT335B was an agricultural tractor model made from 2006 – 2009

Leave a Comment