Challenger MT465D

Challenger MT465D Utility tractor Technical Specifications

Challenger MT465D is a Row-Crop tractor that was produced by the John Deere between 2014 – 2016.

Below you will find detailed technical specifications for Challenger MT465D covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Challenger MT465D Production

Manufacturer: Challenger (a part of AGCO)
Type: Utility tractor

Challenger MT465D Electrical

Ground: negative
Charging system: alternator
Charging amps: 175
Batteries: 2
Battery CCA: 600
Battery volts: 12

Challenger MT465D Mechanical

Chassis: 4×4 MFWD 4WD
Steering: hydrostatic power
Brakes: wet disc
Cab: Cab standard with air-conditioning.
Transmission: 16-speed four speed power shift


Type: closed center load sensing (CCLS)
  open center optional
Valves: 2 to 4
SCV flow: 15 gpm
56.8 lpm (open center)
  (26 gpm
0.0 lpm (open twin flow)
  29 gpm
109.8 lpm (CCLS)

Tracktor Hitch

Rear Type: III/II
Control: electronic lower link draft sensing
Rear lift (at 24″/610mm): 11400 lbs
5171 kg
Drawbar: Cat. 2

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/1000

Challenger MT465D Engine detail

Engine Detail
AGCO Power 49AWI
turbocharged air-to-air intercooled diesel
4-cylinder 16-valve
Displacement: 299 ci
4.9 L
Bore/Stroke: 4.251×5.276 inches
108 x 134 mm
Emissions: Interim Tier IV
Emission control: selective catalytic reduction (SCR)
Power (gross): 120 hp
89.5 kW
Fuel system: electronic high pressure common rail
Air cleaner: dual dry element
Pre-heating: thermostart
Rated RPM: 2200
Starter: electric
Starter volts: 12

Challenger MT465D Transmission overview

Engine Oil

Transmission: AutoPower IV
Type: four speed power shift
Gears: 16 forward and reverse
Clutch: wet disc
Four power shift gears in four ranges.

Challenger MT465D Dimensions

Wheelbase: 105 inches
266 cm
Shiping weight: 12500 lbs
5670 kg
Rear axle: Flange
Rear axle: Bar: 3.23 by 80 inches
82 by 2032 mm
Rear axle: Bar: 3.23 by 105 inches
82 by 2667 mm


Is Challenger MT465D a good tractor?

The Challenger MT465D is one of the great tractors in the Challenger (a part of AGCO) stable, and it has earned Challenger (a part of AGCO) a fantastic reputation.

How much oil does a Challenger MT465D take?

Check out the Challenger MT465D oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Challenger (a part of AGCO) made the MT455D

The Challenger MT465D was an agricultural tractor model made from 2014 – 2016

Leave a Comment