Challenger MT675C

Challenger MT675C Row-Crop tractor Technical Specifications

Challenger MT675C is a Row-Crop tractor that was produced by the John Deere between 2009 – 2010.

Below you will find detailed technical specifications for Challenger MT675C covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Challenger MT675C Production

Manufacturer: Challenger (a part of AGCO)
Type: Row-Crop tractor
Factory: Beauvais, France
Original price: $252,494 (2009 )

Challenger MT675C Power

Engine (gross): 320 hp
238.6 kW
PTO (claimed): 275 hp
205.1 kW
Drawbar (tested): 240.7 hp
179.5 kW
PTO (tested): 322.6 hp
240.6 kW

Challenger MT675C Electrical

Ground: negative
Charging system: alternator
Charging amps: 240*Two 120A alternators.
Batteries: 2
Battery CCA: 775
Battery volts: 12

Challenger MT675C Mechanical

Chassis: 4×4 MFWD 4WD
Final drives: planetary
Differential lock: electro-hydraulic front and rear
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control.
Transmission: continuously variable transmission


Type: closed center load sensing
Pressure: 2,901 psi
200.0 bar
Valves: 4 to 6
Pump flow: 26.4 gpm
99.9 lpm
Total flow: 46.2 gpm
174.9 lpm

Tracktor Hitch

Rear Type: III
Control: electronic lower-link draft sensing
Rear lift (at ends): 26,460 lbs
12002 kg
Rear lift (at 24″/610mm): 21,336 lbs
9678 kg
Front lift (at ends): 11,020 lbs
4998 kg

Power Take-off (PTO)

Rear PTO: independent
Clutch: electro-hydraulic
Rear RPM: 1000E/1000 (1.75)
  540E/1000 (1.375)*Optional
Front PTO: independent*Optional
Front RPM: 1000 (1.375)

Challenger MT675C Engine detail

Engine Detail
turbocharged intercooled diesel
The engine uses AGCO`s e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). An exhaust-gas recirculation (IEGR) version of the engine was optionally available.
Displacement: 512.6 ci
8.4 L
Bore/Stroke: 4.37×5.71 inches
111 x 145 mm
Emissions: Interim Tier 4
Emission control: selective catalytic reduction (SCR)
  integrated exhaust gas recirculation (IECR) optional
Power (gross): 320 hp
238.6 kW
Maximum Power: 350 hp
261.0 kW
Fuel system: electronic high-pressure common rail
Air cleaner: dual paper elements
Compression: 16.7:1
Rated RPM: 2200
Torque: 1100 lb-ft
1491.6 Nm
Torque RPM: 1500
Starter: electric
Starter volts: 12

Challenger MT675C Transmission overview

Engine Oil

Transmission: Techstar CVT
Type: continuously variable transmission
Gears: infinite (2-range) forward and reverse

Challenger MT675C Dimensions

Wheelbase: 122.2 inches
310 cm
Length: 223.2 inches
566 cm
Height (cab): 133.1 inches
338 cm
Shiping weight: 24,250 lbs
10999 kg
Max weight: 38,890 lbs
17640 kg
Rear axle: Bar: 4.33 by 118 inches
109 by 2997 mm
Front tread: 60.9 to 88.8 inches
154 to 225 cm
Rear tread: 58.5 to 119.5 inches
148 to 303 cm

Challenger MT675C Tests

OCED Tractor Test 2499

OCED Tractor Test 2499
SCR diesel Techstar CVT 4WD
October 2008 – March 2009,
Link: OCED Tractor Test 2499 file
PTO performance
Max power: 316.6 hp
236.1 kW
Fuel use: 15.6 gal/hour
59.0 l/hour
Power at rated engine speed: 281.2 hp
209.7 kW
Fuel use: 15.0 gal/hour
56.8 l/hour
Power at rated PTO speed: 307.0 hp
228.9 kW
Fuel use: 15.7 gal/hour
59.4 l/hour
Drawbar performance
Max power: 240.7 hp
179.5 kW
Fuel use: 15.0 gal/hour
56.8 l/hour
Pull at 8.4 KPH
Max pull: 36,320 lbs
16474 kg
Pull at 3.7 KPH

OCED Tractor Test 2559

OCED Tractor Test 2559
IEGR diesel Techstar CVT 4WD
October 2009 – March 2010,
Link: OCED Tractor Test 2559 file
PTO performance
Max power: 322.6 hp
240.6 kW
Fuel use: 18.0 gal/hour
68.1 l/hour
Power at rated engine speed: 282.7 hp
210.8 kW
Fuel use: 17.2 gal/hour
65.1 l/hour
Power at rated PTO speed: 305.6 hp
227.9 kW
Fuel use: 17.3 gal/hour
65.5 l/hour
Drawbar performance
Max power: 236.3 hp
176.2 kW
Fuel use: 17.2 gal/hour
65.1 l/hour
Pull at 8.97 KPH
Max pull: 26725 lbs
12122 kg
Pull at 5.07 KPH


Is Challenger MT675C a good tractor?

The Challenger MT675C is one of the great tractors in the Challenger (a part of AGCO) stable, and it has earned Challenger (a part of AGCO) a fantastic reputation.

How much oil does a Challenger MT675C take?

Check out the Challenger MT675C oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Challenger (a part of AGCO) made the MT665C

The Challenger MT675C was an agricultural tractor model made from 2009 – 2010

Leave a Comment