Deutz-Allis 8030

Deutz-Allis 8030 Technical Specifications

Deutz-Allis 8030 is a Row-Crop tractor that was produced by the John Deere between 1985 – 1988.

Below you will find detailed technical specifications for Deutz-Allis 8030 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Allis 8030 Production

Manufacturer: Deutz-Allis
Type: Row-Crop tractor
Factory: West Allis, Wisconsin, USA
Total built: 2,328
Original price: $52,398

Deutz-Allis 8030 Power

Drawbar (tested): 115.22 hp
85.9 kW
PTO (tested): 133.75 hp
99.7 kW

Deutz-Allis 8030 Electrical

Charging system: alternator
Charging amps: 100
Battery volts: 12

Deutz-Allis 8030 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD (optional)
Differential lock: foot-button
Steering: hydrostatic power
Brakes: differential hydraulic wet discs
Cab: Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
Transmissions: 16-speed partial power shift
  20-speed partial power shift
  12-speed Allis-Chalmers


Fuel: 60 gal
227.1 L
  25 gal
94.6 L (optional tank)
Rear diff.: 66.8 qts
63.2 L


Type: closed-center load-sensitive
Valves: 2 or 3
Pump flow: 22 gpm
83.3 lpm
  13.5 gpm
51.1 lpm (transmission)
Total flow: 45 gpm
170.3 lpm
Steering flow: 9.5 gpm
36.0 lpm

Tracktor Hitch

Rear Type: III/II
Rear lift (at 24″/610mm): 6,680 lbs
3030 kg
  8,200 lbs
3719 kg (optional)

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/1000

Deutz-Allis 8030 Engine detail

Engine Detail
Allis Chalmers 670T
turbocharged diesel
liquid-cooled inline
Displacement: 426 ci
7.0 L
Bore/Stroke: 4.25×5.00 inches
108 x 127 mm
Air cleaner: dry
Compression: 15.5:1
Rated RPM: 2300
Starter volts: 12
Oil capacity: 19 qts
18.0 L
Coolant capacity: 31 qts
29.3 L

Deutz-Allis 8030 Transmission overview

Engine Oil

Transmission: Allis-Chalmers Power Director
Type: partial power shift
Gears: 16 forward and 4 reverse
Oil capacity: 29.6 qts
28.0 L
Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.

Deutz-Allis 8030 Dimensions

Wheelbase: 106 inches
269 cm (2WD)
  96 inches
243 cm (4WD)
Length: 187 inches
474 cm
Width: 93.4 inches
237 cm
Ground clearance: 17.5 inches
44 cm (4WD front axle)
  21 inches
53 cm ( 2WD front axle)
  28 inches
71 cm (rear axle)

Deutz-Allis 8030 Weight
Shipping: 14,200 lbs
6441 kg (4WD)
Operating: 15,015 lbs
6810 kg (2WD duals)
Ballasted: 17,100 lbs
7756 kg

Deutz-Allis 8030 Height
Hood: 69 inches
175 cm
Cab: 115 inches
292 cm
Exhaust: 113 inches
287 cm

Deutz-Allis 8030 Tests

Nebraska Tractor Test 1447

Nebraska Tractor Test 1447
Diesel 12-speed 2WD
August 31 – September 13, 1982
Link: Nebraska Tractor Test 1447 file
PTO performance
Power at rated engine speed: 133.75 hp
99.7 kW
Fuel use: 8.9 gal/hour
33.7 l/hour
Power at rated PTO speed: 134.42 hp
100.2 kW
Fuel use: 8.8 gal/hour
33.3 l/hour
Drawbar performance
Max power: 115.22 hp
85.9 kW
Fuel use: 8.9 gal/hour
33.7 l/hour
Gear 2F used for power test.
Max pull: 13,348 lbs
6054 kg
Gear 3S used for pull test.


Is Deutz-Allis 8030 a good tractor?

The Deutz-Allis 8030 is one of the great tractors in the Deutz-Allis stable, and it has earned Deutz-Allis a fantastic reputation.

How much oil does a Deutz-Allis 8030 take?

Check out the Deutz-Allis 8030 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Allis made the 8010

The Deutz-Allis 8030 was an agricultural tractor model made from 1985 – 1988

Leave a Comment