Deutz-Fahr DX 3.50 Utility tractor Technical Specifications
Deutz-Fahr DX 3.50 is a Row-Crop tractor that was produced by the John Deere between 1984 – 1995.
Below you will find detailed technical specifications for Deutz-Fahr DX 3.50 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Deutz-Fahr DX 3.50 Production
Manufacturer: |
Manufacturer: |
Deutz-Fahr
|
Type: |
Utility tractor
|
Factory: |
Germany
|
Deutz-Fahr DX 3.50 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
ROPS Brakes: |
mechanical disc
|
Cab Brakes: |
hydraulic disc
|
Cab: |
Four-post ROPS with canopy. StarCab optional.
|
Transmissions: |
8-speed partially synchronized
|
|
12-speed partially synchronized
|
|
16-speed two-speed power shift
|
|
24-speed two-speed power shift
|
Capacity
ROPS Fuel: |
19.8 gal 74.9 L
|
Cab Fuel: |
22.5 gal 85.2 L
|
Hydraulic system: |
4 gal 15.1 L
|
|
7.5 gal 28.4 L *Optional
|
Hydraulics
Type: |
open center
|
Capacity: |
4 gal 15.1 L
|
|
7.5 gal 28.4 L *Optional
|
Pressure: |
2538 psi 175.0 bar
|
Rear valves: |
1 to 3
|
Front valves: |
2*Optional
|
Pump flow: |
13.5 gpm 51.1 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift: |
5291 lbs 2399 kg
|
Front Hitch: |
II*Optional. Not available with StarCab.
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Rear RPM: |
540 (1.375)
|
Front PTO: |
independent*Optional. Not available with StarCab.
|
Clutch: |
dry disc
|
Front RPM: |
1000
|
Deutz-Fahr DX 3.50 Engine detail
Engine Detail |
Deutz F3L 913 |
diesel |
3-cylinder |
air-cooled |
Displacement: |
186.72 ci 3.1 L
|
Bore/Stroke: |
3.94×4.84 inches 100 x 123 mm
|
Power: |
61 hp 45.5 kW
|
Rated RPM: |
2500
|
Oil capacity: |
8.5 qts 8.0 L
|
Engine Oil |
Deutz-Fahr DX 3.50 Transmission overview
Type: |
partially synchronized
|
Gears: |
8 forward and 4 reverse
|
Clutch: |
dry disc
|
Oil capacity: |
21.1 qts 20.0 L
|
Four synchronized gears (1-4) in two ranges (low/high) plus reverse range. |
Deutz-Fahr DX 3.50 Dimensions
2WD Wheelbase: |
79 inches 200 cm
|
4WD Wheelbase: |
82 inches 208 cm
|
Length: |
144.5 inches 367 cm
|
Width: |
82.3 inches 209 cm
|
Height (ROPS): |
92.5 inches 234 cm
|
Height (cab): |
97.5 inches 247 cm
|
Rear tread: |
59 to 78.8 inches 149 to 200 cm
|
Deutz-Fahr DX 3.50 Weight |
2WD ROPS : |
6018 lbs 2729 kg
|
2WD Cab : |
6879 lbs 3120 kg
|
4WD ROPS : |
6459 lbs 2929 kg
|
4WD Cab : |
7319 lbs 3319 kg
|
FAQ
Is Deutz-Fahr DX 3.50 a good tractor?
The Deutz-Fahr DX 3.50 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.
How much oil does a Deutz-Fahr DX 3.50 take?
Check out the Deutz-Fahr DX 3.50 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Deutz-Fahr made the DX 3.30
The Deutz-Fahr DX 3.50 was an agricultural tractor model made from 1984 – 1995
|