Deutz-Fahr DX 4.50

Deutz-Fahr DX 4.50 Utility tractor Technical Specifications

Deutz-Fahr DX 4.50 is a Row-Crop tractor that was produced by the John Deere between 1983 – 1989.

Below you will find detailed technical specifications for Deutz-Fahr DX 4.50 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr DX 4.50 Production

Manufacturer: Deutz-Fahr
Type: Utility tractor

Deutz-Fahr DX 4.50 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Steering: power
Brakes: hydraulic drum
Transmissions: 15-speed synchronized
  20-speed creeper


Pressure: 2538 psi
175.0 bar
Pump flow: 10.6 gpm
40.1 lpm

Tracktor Hitch

Rear Type: II
Rear lift: 11465 lbs
5200 kg
Front Hitch: II
Front lift: 3968 lbs
1799 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/1000
Front PTO: independent
Front RPM: 1000

Deutz-Fahr DX 4.50 Engine detail

Engine Detail
Deutz BF4L 913
turbocharged diesel
Displacement: 249.3 ci
4.1 L
Bore/Stroke: 3.94×4.84 inches
100 x 123 mm
Power: 80.5 hp
60.0 kW
Rated RPM: 2300
Starter: electric
Starter volts: 12

Deutz-Fahr DX 4.50 Transmission overview

Engine Oil

Type: synchronized
Gears: 15 forward and 5 reverse
Five gears (1-5) in three ranges (L/M/H) plus reverse (R) range.

Deutz-Fahr DX 4.50 Dimensions

2WD Wheelbase: 91.7 inches
232 cm
4WD Wheelbase: 94.5 inches
240 cm
2WD Length: 159.1 inches
404 cm
4WD Length: 162.3 inches
412 cm
Width: 79.9 inches
202 cm
Height: 104.3 inches
264 cm
2WD Ground clearance: 20.8 inches
52 cm
4WD Ground clearance: 17.9 inches
45 cm
2WD Front tread: 60 to 79.7 inches
152 to 202 cm
4WD Front tread: 59.5 to 74.4 inches
151 to 188 cm
Rear tread: 63 to 78.7 inches
160 to 199 cm

Deutz-Fahr DX 4.50 Weight
2WD : 8069 lbs
3660 kg
4WD : 8796 lbs
3989 kg
2WD Max capacity: 12125 lbs
5499 kg
4WD Max capacity: 12787 lbs
5800 kg


Is Deutz-Fahr DX 4.50 a good tractor?

The Deutz-Fahr DX 4.50 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr DX 4.50 take?

Check out the Deutz-Fahr DX 4.50 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the DX 4.30

The Deutz-Fahr DX 4.50 was an agricultural tractor model made from 1983 – 1989

Leave a Comment