Deutz-Fahr DX 6.05

Deutz-Fahr DX 6.05 Row-Crop tractor Technical Specifications

Deutz-Fahr DX 6.05 is a Row-Crop tractor that was produced by the John Deere between 1987 – 1991.

Below you will find detailed technical specifications for Deutz-Fahr DX 6.05 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr DX 6.05 Production

Manufacturer: Deutz-Fahr
Type: Row-Crop tractor

Deutz-Fahr DX 6.05 Mechanical

Chassis: 4×4 MFWD 4WD
Transmissions: 18-speed


Pump flow: 12.4 gpm
46.9 lpm

Tracktor Hitch

Rear lift: 11466 lbs
5200 kg

Power Take-off (PTO)

Rear RPM: 540/1000

Deutz-Fahr DX 6.05 Engine detail

Engine Detail
Deutz F6L 912
Displacement: 344.89 ci
5.7 L
Bore/Stroke: 3.94×4.72 inches
100 x 120 mm
Power: 98 hp
73.1 kW
Rated RPM: 2300

Deutz-Fahr DX 6.05 Transmission overview

Engine Oil

Transmission: TW 902
Gears: 18 forward and 6 reverse
Six gears (1-6) in three ranges (L/M/H) plus reverse range (R).

Deutz-Fahr DX 6.05 Dimensions

Wheelbase: 106.30 inches
270 cm
Length: 175.59 inches
445 cm
Height: 107.87 inches
273 cm
Weight: 9988 lbs
4530 kg


Is Deutz-Fahr DX 6.05 a good tractor?

The Deutz-Fahr DX 6.05 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr DX 6.05 take?

Check out the Deutz-Fahr DX 6.05 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the DX 6.05?

The Deutz-Fahr DX 6.05 was an agricultural tractor model made from 1987 – 1991

Leave a Comment