Deutz-Fahr DX 6.30

Deutz-Fahr DX 6.30 Row-Crop tractor Technical Specifications

Deutz-Fahr DX 6.30 is a Row-Crop tractor that was produced by the John Deere between 1983 – 1990.

Below you will find detailed technical specifications for Deutz-Fahr DX 6.30 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr DX 6.30 Production








Manufacturer:
Manufacturer: Deutz-Fahr
Type: Row-Crop tractor


Deutz-Fahr DX 6.30 Electrical










Ground: negative
Charging system: alternator
Battery volts: 12

Deutz-Fahr DX 6.30 Mechanical






























Chassis: 4×2 2WD
  4×4 MFWD 4WD
Differential lock: mechanical rear
  OPTITRAC front
Steering: power
Brakes: hydraulic dry disc
Cab: Mastercab standard with air-conditioning.
Transmissions: 15-speed fully synchronized
  20-speed

Hydraulics













Type: open center
Pressure: 2538 psi
175.0 bar
Valves: 1 to 3
Pump flow: 24 gpm
90.8 lpm

Tracktor Hitch







Rear Type: II
Rear lift (at ends): 11243 lbs
5099 kg

Power Take-off (PTO)
















Rear PTO: independent
Rear RPM: 540/1000 (1.375)
Engine RPM: 540@2200
1000@2200
Front PTO: independent
Front RPM: 1000

Deutz-Fahr DX 6.30 Engine detail































Engine Detail
Deutz F6L 913
diesel
6-cylinder
air-cooled
Displacement: 373.9 ci
6.1 L
Bore/Stroke: 4.016×4.92 inches
102 x 125 mm
Power: 115 hp
85.8 kW
Rated RPM: 2400
Starter: electric
Starter volts: 12
Oil capacity: 16 qts
15.1 L



Deutz-Fahr DX 6.30 Transmission overview

Engine Oil














Type: fully synchronized
Gears: 15 forward and 5 reverse
Clutch: cerametallic disc
Oil capacity: 50.7 qts
48.0 L
Five gears (1-5) in three ranges (L/M/H) plus reverse (R) range.

Deutz-Fahr DX 6.30 Dimensions




























2WD Wheelbase: 105.8 inches
268 cm
4WD Wheelbase: 106.4 inches
270 cm
Length: 179.1 inches
454 cm
Width: 90.5 inches
229 cm
2WD Height: 107.3 inches
272 cm
4WD Height: 112.2 inches
284 cm
2WD Weight: 9700 lbs
4399 kg
4WD Weight: 10670 lbs
4839 kg
Rear tread: 64 to 88 inches
162 to 223 cm

FAQ

Is Deutz-Fahr DX 6.30 a good tractor?

The Deutz-Fahr DX 6.30 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr DX 6.30 take?

Check out the Deutz-Fahr DX 6.30 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the DX 6.10

The Deutz-Fahr DX 6.30 was an agricultural tractor model made from 1983 – 1990

Leave a Comment