Deutz-Fahr DX 7.10

Deutz-Fahr DX 7.10 Row-Crop tractor Technical Specifications

Deutz-Fahr DX 7.10 is a Row-Crop tractor that was produced by the John Deere between 1984 – 1989.

Below you will find detailed technical specifications for Deutz-Fahr DX 7.10 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr DX 7.10 Production

Manufacturer: Deutz-Fahr
Type: Row-Crop tractor

Deutz-Fahr DX 7.10 Electrical

Ground: negative
Charging system: alternator
Battery volts: 12

Deutz-Fahr DX 7.10 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Differential lock: mechanical rear
  OPTITRAC front
Steering: power
Brakes: hydraulic dry disc
Cab: Mastercab standard with air-conditioning.
Transmissions: 24-speed two-speed power shift


Type: open center
Pressure: 2538 psi
175.0 bar
Valves: 1 to 3
Pump flow: 27.3 gpm
103.3 lpm

Tracktor Hitch

Rear Type: III
Rear lift (at ends): 18739 lbs
8500 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/1000 (1.375)
Engine RPM: 540@1920
Front PTO: independent
Front RPM: 1000

Deutz-Fahr DX 7.10 Engine detail

Engine Detail
Deutz F6L 913
turbocharged diesel
Displacement: 373.9 ci
6.1 L
Bore/Stroke: 4.016×4.92 inches
102 x 125 mm
Power: 160 hp
119.3 kW
Rated RPM: 2400
Starter: electric
Starter volts: 12
Oil capacity: 17 qts
16.1 L

Deutz-Fahr DX 7.10 Transmission overview

Engine Oil

Transmission: Powermatic
Type: two-speed power shift
Gears: 24 forward and 8 reverse
Clutch: cerametallic disc
Oil capacity: 79.25 qts
75.0 L

Deutz-Fahr DX 7.10 Dimensions

2WD Wheelbase: 103.5 inches
262 cm
4WD Wheelbase: 111.3 inches
282 cm
Length: 187.8 inches
477 cm
Width: 93 inches
236 cm
Height: 109.8 inches
278 cm
2WD Weight: 11905 lbs
5400 kg
4WD Weight: 12897 lbs
5850 kg
Rear tread: 64 to 88 inches
162 to 223 cm


Is Deutz-Fahr DX 7.10 a good tractor?

The Deutz-Fahr DX 7.10 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr DX 7.10 take?

Check out the Deutz-Fahr DX 7.10 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the DX 6.50

The Deutz-Fahr DX 7.10 was an agricultural tractor model made from 1984 – 1989

Leave a Comment