Farmall 404

Farmall 404 Technical Specifications

Farmall 404 is a Row-Crop tractor that was produced by the John Deere between 1961 – 1968.

Below you will find detailed technical specifications for Farmall 404 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 404 Production











Manufacturer:
Manufacturer: Farmall (a part of International Harvester)
Factory: Louisville, Kentucky, USA
Total built: 2440


Farmall 404 Power






















Engine:
Drawbar (claimed): 33.4 hp
24.9 kW (gas)
  29 hp
21.6 kW (LP)
PTO (claimed): 36.7 hp
27.4 kW (gas)
  33 hp
24.6 kW (LP)
Plows: 2-3
Drawbar (tested): 32.97 hp
24.6 kW
PTO (tested): 36.70 hp
27.4 kW

Farmall 404 Mechanical































Chassis: 4×2 2WD
Steering: manual
  power (optional)
Brakes: differential mechanical disc
Cab: Open operator station. Optional deluxe deep-cushion seat with padded backrest.
Transmissions: 4-speed
  8-speed
  4-speed manual shuttle

Capacity










Fuel: 16.2 gal
61.3 L (gas)
  19 gal
71.9 L (LP-gas)
Hydraulic system: 5 gal
18.9 L

Hydraulics
















Type: live
Capacity: 5 gal
18.9 L
Valves: 1 or 2
Total flow: 4.5 gpm
17.0 lpm
  9.3 gpm
35.2 lpm (optional)

Tracktor Hitch




Rear Type: I

Power Take-off (PTO)







Rear PTO: transmission
Rear RPM: 540

Title serial numbers



























1961: 501
1962: 826
1963: 1936
1964: 2259
1965: 2568
1966: 2790
1967: 2980
1968: 3170


how to read serial numbers…

What year is my Farmall 404? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

Farmall 404 Engine detail





































Engine Detail
International Harvester C-135
gasoline
4-cylinder
liquid-cooled
Displacement: 134.8 ci
2.2 L
Bore/Stroke: 3.25×4.0625 inches
83 x 103 mm
Air cleaner: oil bath
Compression: 7.7:1
Rated RPM: 2000
Idle RPM: 900-2000
Starter volts: 12
Oil capacity: 7 qts
6.6 L
Coolant capacity: 15 qts
14.2 L



Farmall 404 Transmission overview

Engine Oil









Gears: 4 forward and 1 reverse
Clutch: 9-inch dry disc
Oil capacity: 20 qts
18.9 L

Farmall 404 Dimensions

























Wheelbase: 82.2 inches
208 cm (tricycle)
  87.8 inches
223 cm (wide front)
Length: 94 inches
238 cm
Height (steering wheel): 64.1 inches
162 cm
Front tread: 8 inches
20 cm (tricycle)
Front tread: 50 to 82 inches
127 to 208 cm
Rear tread: 48 to 80 inches
121 to 203 cm
Rear tread: 48 to 88 inches
121 to 223 cm (long axle)













Farmall 404 Weight
Shipping: 3,400 lbs
1542 kg
Operating: 4,115 lbs
1866 kg
Ballasted: 6,645 lbs
3014 kg

Farmall 404 Tests

Nebraska Tractor Test 818







































Nebraska Tractor Test 818
Gasoline 8-speed 2WD
May 21 – June 4, 1962
Link: Nebraska Tractor Test 818 file
PTO performance
Power at rated engine speed: 36.70 hp
27.4 kW
Fuel use: 3.0 gal/hour
11.4 l/hour
Drawbar performance
Max power: 32.97 hp
24.6 kW
Fuel use: 3.0 gal/hour
11.4 l/hour
Gear 3-Low used for power test.
Max pull: 4,999 lbs
2267 kg
Gear 1-Low used for pull test.

FAQ

Is Farmall 404 a good tractor?

The Farmall 404 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 404 take?

Check out the Farmall 404 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the 404?

The Farmall 404 was an agricultural tractor model made from 1961 – 1968

Leave a Comment