Farmall 756 Row-Crop tractor Specs & Features

Contents show

Farmall 756 Row-Crop tractor Technical Specifications

Farmall 756 is a Row-Crop tractor that was produced by the John Deere between 1967 – 1971.

Below you will find detailed technical specifications for Farmall 756 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 756 Production

Manufacturer:
Manufacturer:	Farmall (a part of International Harvester)
Type:	Row-Crop tractor
The Farmall 756 was not tested at Nebraska, the tests for the Farmall 706 were used.

Farmall 756 Power

Engine:
Drawbar (claimed):	68 hp 50.7 kW
PTO (claimed):	76.5 hp 57.0 kW
Drawbar (tested):	67.46 hp 50.3 kW
PTO (tested):	76.56 hp 57.1 kW

Farmall 756 Electrical

Charging system:	alternator
Charging amps:	55
Batteries:	1 (gas/LPG)
	2 (diesel)
Battery volts:	12 (gas/LPG)
	6 (diesel)
Battery AH:	60 (gas/LPG)
	130 (diesel)

Farmall 756 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Steering:

hydrostatic power

Brakes:

independent hydraulic disc

Cab:

Cab optional with heat and A/C

Transmissions:

8-speed

16-speed two-speed power shift

Tracktor Hitch

Rear Type:	2
Type:	IH Fast Hitch

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	1000
	540/1000
Engine RPM:	540@2100 1000@2100

Title serial numbers

Location:	Clutch housing, left side.
1967 (Farmall):	7501
1968 (Farmall):	9904
1969 (Farmall):	14125
1970 (Farmall):	17832
1971 (Farmall):	18374
1967 (IH):	7501
1968 (IH):	7672
1969 (IH):	8164
1970 (IH):	8284
1971 (IH):	8427
how to read serial numbers…

What year is my Farmall 756? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

Farmall 756 Engine detail

Engine Detail
International Harvester D-310
diesel
6-cylinder
liquid-cooled
Displacement:	310 ci 5.1 L
Bore/Stroke:	3.875×4.375 inches 98 x 111 mm
Air cleaner:	dual dry elements
Compression:	16:1
Rated RPM:	2300
Starter volts:	12
Oil capacity:	12 qts 11.4 L
Coolant capacity:	23.5 qts 22.2 L

Farmall 756 Transmission overview

Engine Oil

Transmission:	gear
Gears:	8 forward and 4 reverse
Clutch:	dry disc
Oil capacity:	68 qts 64.4 L
Four gears each in high, low, and reverse ranges.

Farmall 756 Dimensions

Wheelbase:	105 inches 266 cm
Length:	164 inches 416 cm
Width:	92 inches 233 cm
Height (steering wheel):	82 inches 208 cm
Shipping weight:	8,350 lbs 3787 kg (diesel)

Farmall 756 Tests

Nebraska Tractor Test 955

Nebraska Tractor Test 955
310 diesel Torque Amplifier 2WD November 14 – 28, 1966 Link: Nebraska Tractor Test 955 file
PTO performance
Power at rated engine speed:	76.09 hp 56.7 kW
Fuel use:	5.0 gal/hour 18.9 l/hour
Power at rated PTO speed:	71.84 hp 53.6 kW
Fuel use:	4.7 gal/hour 17.8 l/hour
Drawbar performance
Max power:	67.46 hp 50.3 kW
Fuel use:	5.0 gal/hour 18.9 l/hour
Gear 1-High-Direct used for power test.
Max pull:	8,416 lbs 3817 kg
Gear 3-Low-TA used for pull test.

Nebraska Tractor Test 956

Nebraska Tractor Test 956
291 LP gas Torque Amplifier 2WD November 14 – 28, 1966 Link: Nebraska Tractor Test 956 file
PTO performance
Power at rated engine speed:	76.3 hp 56.9 kW
Fuel use:	8.4 gal/hour 31.8 l/hour
Power at rated PTO speed:	70.98 hp 52.9 kW
Fuel use:	7.6 gal/hour 28.8 l/hour
Drawbar performance
Max power:	66.53 hp 49.6 kW
Fuel use:	8.3 gal/hour 31.4 l/hour
Gear 1-High-Direct used for power test.
Max pull:	8,387 lbs 3804 kg
Gear 3-Lo-TA used for pull test.

Nebraska Tractor Test 957

Nebraska Tractor Test 957
291 gas Torque Amplifier 2WD November 16 – 28, 1966 Link: Nebraska Tractor Test 957 file
PTO performance
Power at rated engine speed:	76.56 hp 57.1 kW
Fuel use:	6.3 gal/hour 23.8 l/hour
Power at rated PTO speed:	71.8 hp 53.5 kW
Fuel use:	5.8 gal/hour 22.0 l/hour
Drawbar performance
Max power:	65.67 hp 49.0 kW
Fuel use:	6.3 gal/hour 23.8 l/hour
Gear 1-High-DD used for power test.
Max pull:	8,387 lbs 3804 kg
Gear 3-Low-TA used for pull test.

FAQ

Is Farmall 756 a good tractor?

The Farmall 756 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 756 take?

Check out the Farmall 756 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the 756?

The Farmall 756 was an agricultural tractor model made from 1967 – 1971

Where is the serial number on a Farmall 756?

Lookup clutch housing, left side.