Farmall 806

Farmall 806 Technical Specifications

Farmall 806 is a Row-Crop tractor that was produced by the John Deere between 1963 – 1967.

Below you will find detailed technical specifications for Farmall 806 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 806 Production











Manufacturer:
Manufacturer: Farmall (a part of International Harvester)
Type: Row-Crop tractor
Total built: 42,957


Farmall 806 Power
















Engine:
Engine (gross): 110 hp
82.0 kW
Drawbar (claimed): 84 hp
62.6 kW
PTO (claimed): 94.5 hp
70.5 kW
Drawbar (tested): 84.77 hp
63.2 kW
PTO (tested): 94.93 hp
70.8 kW

Farmall 806 Electrical




























Ground: negative
Charging system: generator
Charging amps: 25
Batteries: 2 (diesel)
  1 (gas/LP)
Battery volts: 6 (diesel)
  12 (gas/LP)
Battery AH: 170 (diesel)
  60 (gas/LP)

Farmall 806 Mechanical

























Chassis: 4×2 2WD
Steering: hydrostatic power
Brakes: hydraulic dry disc
Cab: Open operator station.
Transmissions: 8-speed unsynchronized
  16-speed two-speed power shift

Hydraulics










Pump flow: 12 gpm
45.4 lpm
  3 gpm
11.4 lpm (PTO pump)
Steering flow: 9 gpm
34.1 lpm

Tracktor Hitch







Rear Type: 2/1
Type: IH Fast Hitch

Power Take-off (PTO)










Rear PTO: independent
Rear RPM: 540/1000
  1000

Farmall 806 Engine detail































Engine Detail
International Harvester D-361
diesel
6-cylinder
liquid-cooled
Displacement: 361 ci
5.9 L
Bore/Stroke: 4.125×4.50 inches
105 x 114 mm
Air cleaner: two-stage dry
Compression: 17:1
Rated RPM: 2400
Idle RPM: 900-2400
Starter volts: 12



Farmall 806 Transmission overview

Engine Oil











Type: unsynchronized
Gears: 8 forward and 4 reverse
Clutch: 12-inch dry disc
Four gears (1-4) in low, high, and reverse ranges.

Farmall 806 Dimensions






















Wheelbase: 101.2 inches
257 cm
Length: 161 inches
408 cm
Width: 110 inches
279 cm
Height (steering wheel): 81 inches
205 cm
Rear axle: 3.25 inch diameter
82 mm
Front tread: 8/16 inches
20/40 cm
Rear tread: 56 to 94 inches
142 to 238 cm













Farmall 806 Weight
Gasoline Shipping: 7,720 lbs
3501 kg
Diesel Shipping: 8,500 lbs
3855 kg
Ballasted: 11,895 lbs
5395 kg

Farmall 806 Tests

Nebraska Tractor Test 857













































Nebraska Tractor Test 857
Diesel Torque Amplifier 2WD
October 22 – 30, 1963
Link: Nebraska Tractor Test 857 file
PTO performance
Power at rated engine speed: 94.93 hp
70.8 kW
Fuel use: 6.3 gal/hour
23.8 l/hour
Power at rated PTO speed: 89.04 hp
66.4 kW
Fuel use: 5.9 gal/hour
22.3 l/hour
Drawbar performance
Max power: 84.77 hp
63.2 kW
Fuel use: 6.4 gal/hour
24.2 l/hour
Gear 2H-TA used for power test.
Max pull: 9,182 lbs
4164 kg
Gear 3L-TA used for pull test.










Nebraska Tractor Test 859









































Nebraska Tractor Test 859
Gasoline Torque Amplifier 2WD
10/28/1963
Link: Nebraska Tractor Test 859 file
PTO performance
Power at rated engine speed: 93.27 hp
69.6 kW
Fuel use: 7.4 gal/hour
28.0 l/hour
Power at rated PTO speed: 83.99 hp
62.6 kW
Fuel use: 6.6 gal/hour
25.0 l/hour
Drawbar performance
Max power: 80.70 hp
60.2 kW
Fuel use: 7.5 gal/hour
28.4 l/hour
Gear 2H-TA used for power test.
Max pull: 9,003 lbs
4083 kg
Gear 3L-TA used for pull test.







Nebraska Tractor Test 861









































Nebraska Tractor Test 861
LP-gas Torque Amplifier 2WD
November 6 – 26, 1963
Link: Nebraska Tractor Test 861 file
PTO performance
Power at rated engine speed: 93.42 hp
69.7 kW
Fuel use: 9.6 gal/hour
36.3 l/hour
Power at rated PTO speed: 83.20 hp
62.0 kW
Fuel use: 8.4 gal/hour
31.8 l/hour
Drawbar performance
Max power: 81.53 hp
60.8 kW
Fuel use: 9.5 gal/hour
36.0 l/hour
Gear 2H-TA used for power test.
Max pull: 9,072 lbs
4115 kg
Gear 3L-TA used for pull test.

FAQ

Is Farmall 806 a good tractor?

The Farmall 806 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 806 take?

Check out the Farmall 806 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the 706

The Farmall 806 was an agricultural tractor model made from 1963 – 1967

Leave a Comment