Farmall 826

Farmall 826 Technical Specifications

Farmall 826 is a Row-Crop tractor that was produced by the John Deere between 1969 – 1971.

Below you will find detailed technical specifications for Farmall 826 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 826 Production











Manufacturer:
Manufacturer: Farmall (a part of International Harvester)
Factory: Rock Island, Illinois, USA
Original price: $9,600 (1971 )


Farmall 826 Power



















Engine:
Gear Drawbar (claimed): 79 hp
58.9 kW
Hydro Drawbar (claimed): 61 hp
45.5 kW
Gear PTO (claimed): 92 hp
68.6 kW
Hydro PTO (claimed): 84 hp
62.6 kW
Drawbar (tested): 78.92 hp
58.9 kW
PTO (tested): 92.19 hp
68.7 kW

Farmall 826 Mechanical




























Chassis: 4×2 2WD
  4×4 MFWD 4WD
Steering: power
Brakes: hydraulic dry disc
Cab: Open operator station. Cab optional.
Transmissions: 16-speed two-speed power shift
  hydrostatic

Hydraulics




Type: open center

Tracktor Hitch




Rear Type: II

Power Take-off (PTO)







Rear PTO: independent
Rear RPM: 540/1000

Farmall 826 Engine detail




























Engine Detail
International Harvester D-358
diesel
6-cylinder
liquid-cooled
Displacement: 358 ci
5.9 L
Bore/Stroke: 3.875×5.0625 inches
98 x 129 mm
Air cleaner: dual stage dry
Compression: 16:1
Rated RPM: 2400
Starter volts: 12



Farmall 826 Transmission overview

Engine Oil









Transmission: International Harvester Torque Amplifier
Type: two-speed power shift
Gears: 16 forward and 8 reverse

Farmall 826 Dimensions










Wheelbase: 105 inches
266 cm
Gear Operating weight: 9860 lbs
4472 kg
Ballasted weight: 13840 lbs
6277 kg

Farmall 826 Tests

Nebraska Tractor Test 1045













































Nebraska Tractor Test 1045
D358 diesel Torque Amplifier 2WD
June 3 – 27, 1970
Link: Nebraska Tractor Test 1045 file
PTO performance
Power at rated engine speed: 92.19 hp
68.7 kW
Fuel use: 6.2 gal/hour
23.5 l/hour
Power at rated PTO speed: 85.34 hp
63.6 kW
Fuel use: 1.0 gal/hour
3.8 l/hour
Drawbar performance
Max power: 78.92 hp
58.9 kW
Fuel use: 6.2 gal/hour
23.5 l/hour
Gear 1-Hi-TA used for power test.
Max pull: 9,631 lbs
4368 kg
Gear 3-Lo-TA used for pull test.










Nebraska Tractor Test 1046





































Nebraska Tractor Test 1046
D358 diesel hydrostatic 2WD
June 6 – 27, 1970
Link: Nebraska Tractor Test 1046 file
PTO performance
Power at rated engine speed: 84.66 hp
63.1 kW
Fuel use: 6.3 gal/hour
23.8 l/hour
Power at rated PTO speed: 79.00 hp
58.9 kW
Fuel use: 5.6 gal/hour
21.2 l/hour
Drawbar performance
Max power: 61.39 hp
45.8 kW
Fuel use: 6.1 gal/hour
23.1 l/hour
Max pull: 8,780 lbs
3982 kg

FAQ

Is Farmall 826 a good tractor?

The Farmall 826 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 826 take?

Check out the Farmall 826 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the ?

The Farmall 826 was an agricultural tractor model made from 1969 – 1971

Leave a Comment