Farmall Super C Technical Specifications
Farmall Super C is a Row-Crop tractor that was produced by the John Deere between 1951 – 1954.
Below you will find detailed technical specifications for Farmall Super C covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Farmall Super C Production
| Manufacturer: | |
| Manufacturer | Farmall (a part of International Harvester) |
| Total built | 98,310 |
| Original price was $1,700 in 1954 | |
| Engine: | 20.72 hp 15.5 kW |
| Belt (tested) | 23.67 hp 17.7 kW |
Farmall Super C Mechanical
| Two-wheel drive | |
| Manual steering | |
| Differential mechanical disc brakes | |
| Open operator station. |
Tracktor Hitch
| Type | Fast Hitch *Optional beginning in 1953. |
Power Take-off (PTO)
| Rear RPM | 540 |
Title serial numbers
| 1951 | FC100001 |
| 1952 | FC131157 |
| 1953 | FC159130 |
| 1954 | FC187788 |
FAQ: How to read a serial number table. | |
What year is my Farmall Super C? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
Farmall Super C Engine detail
| Engine Detail | |
| International Harvester C123 | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 122.7 ci 2.0 L |
| Bore/Stroke | 3.125×4.00 inches 79 x 102 mm |
| Air cleaner | oil bath |
| Compression | 6:1 |
| Rated RPM | 1400 |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Oil capacity | 5 qts 4.7 L |
| Coolant capacity | 15 qts 14.2 L |
| Engine Oil | |||
| Type | sliding gear |
| Gears | 4 forward and 1 reverse |
Farmall Super C Dimensions
| Wheelbase | 82.25 inches 208 cm |
| Length | 123 inches 312 cm |
| Height | 74.75 inches 189 cm |
| Operating weight | 3100 lbs 1406 kg |
| Ballasted weight | 5039 lbs 2285 kg |
| Rear tread | 47 to 80 inches 119 to 203 cm |
Farmall Super C Tests
| Nebraska Tractor Test 458 | |
| Gasoline 4-speed 2WD May 31 – June 9, 1951 Link: Nebraska Tractor Test 458 file | |
| Belt power (max) | 23.67 hp 17.7 kW |
| Belt fuel use (max) | 2.3 gal/hour 8.7 l/hour |
| Drawbar performance | |
| Max power | 20.72 hp 15.5 kW |
| Gear 2 used for power test. | |
| Max pull | 3,151 lbs 1429 kg |
| Gear 1 used for pull test. | |
FAQ
Is Farmall Super C a good tractor?
The Farmall Super C is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.
How much oil does a Farmall Super C take?
Check out the Farmall Super C oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Farmall (a part of International Harvester) made the Super C?
The Farmall Super C was an agricultural tractor model made from 1951 – 1954
How much does a Farmall Super C tractor weight?
Depending on the engine type, the Farmall Super C weight ranges from 3100 lbs
1406 kg .
How much can a Farmall Super C Pull?
The max pulling capacity of the Farmall Super C tractors starts at 3,151 lbs
1429 kg but may be slightly higher depending on the trim.