Ford 5030 Technical Specifications
Ford 5030 is a Row-Crop tractor that was produced by the John Deere between 1992 – 1997.
Below you will find detailed technical specifications for Ford 5030 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Ford 5030 Production
Manufacturer: |
Manufacturer: |
Ford (a part of New Holland)
|
Factory: |
Curitiba, Brazil
|
Ford 5030 Electrical
Charging system: |
alternator
|
Charging amps: |
55
|
Battery volts: |
12
|
Battery AH: |
100
|
Ford 5030 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Differential lock: |
mechanical rear
|
Steering: |
manual
|
Brakes: |
mechanical wet disc
|
Cab: |
Two-post ROPS.
|
Transmission: |
8-speed constant mesh
|
Capacity
Fuel: |
21.1 gal 79.9 L
|
Hydraulic system: |
12 gal 45.4 L
|
Hydraulics
Type: |
open center
|
Capacity: |
12 gal 45.4 L
|
Pressure: |
2503 psi 172.6 bar
|
Pump flow: |
8.5 gpm 32.2 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift (at 24″/610mm): |
3638 lbs 1650 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
hydraulic
|
Rear RPM: |
540 (1.375)
|
Engine RPM: |
540@1800
|
Ford 5030 Engine detail
Engine Detail |
Ford OHV 4.268 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
268 ci 4.4 L
|
Bore/Stroke: |
4.4×4.4 inches 112 x 112 mm
|
Power: |
75 hp 55.9 kW
|
Fuel system: |
direct injection
|
Air cleaner: |
dual stage dry
|
Compression: |
16.3:1
|
Rated RPM: |
2200
|
Torque: |
206.5 lb-ft 280.0 Nm
|
Torque RPM: |
1200
|
Starter: |
electric
|
Starter volts: |
12
|
Oil capacity: |
14.4 qts 13.6 L
|
Coolant capacity: |
16.1 qts 15.2 L
|
Engine Oil |
Ford 5030 Transmission overview
Type: |
constant mesh
|
Gears: |
8 forward and 2 reverse
|
Clutch: |
305mm dry disc
|
Oil capacity: |
12.7 qts 12.0 L
|
Ford 5030 Dimensions
Wheelbase: |
87.4 inches 221 cm
|
Length: |
159.6 inches 405 cm
|
Width: |
67.5 inches 171 cm
|
Shiping weight: |
5631 lbs 2554 kg
|
Clearance (front axle): |
12.4 inches 31 cm
|
Clearance (rear axle): |
18.5 inches 46 cm
|
Front tread: |
55 to 78 inches 139 to 198 cm
|
Rear tread: |
60 to 80 inches 152 to 203 cm
|
FAQ
Is Ford 5030 a good tractor?
The Ford 5030 is one of the great tractors in the Ford (a part of New Holland) stable, and it has earned Ford (a part of New Holland) a fantastic reputation.
How much oil does a Ford 5030 take?
Check out the Ford 5030 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Ford (a part of New Holland) made the 4630
The Ford 5030 was an agricultural tractor model made from 1992 – 1997
|