Ford 6810 Mark III Technical Specifications
Ford 6810 Mark III is a Row-Crop tractor that was produced by the John Deere between 1988 – 1991.
Below you will find detailed technical specifications for Ford 6810 Mark III covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Ford 6810 Mark III Production
Manufacturer: |
Manufacturer: |
Ford
|
Ford 6810 Mark III Electrical
Ground: |
negative
|
Charging system: |
alternator
|
ROPS Charging amps: |
45
|
Cab Charging amps: |
80
|
Battery volts: |
12
|
Battery AH: |
128
|
Ford 6810 Mark III Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Final drives: |
planetary
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Brakes: |
wet disc
|
Cab: |
Four-post ROPS. Cab optional with air-conditioning.
|
Transmission: |
16-speed
|
Hydraulics
Type: |
open center with closed-center valves
|
Pressure: |
2500 psi 172.4 bar
|
Pump flow: |
18.2 gpm 68.9 lpm
|
SCV flow: |
14.5 gpm 54.9 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Rear lift (at ends): |
5874 lbs 2664 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Rear RPM: |
540/1000 (1.375)
|
Engine RPM: |
540@1900 1000@2060
|
Ford 6810 Mark III Engine detail
Engine Detail |
Ford |
turbocharged diesel |
4-cylinder |
liquid-cooled |
Displacement: |
268.1 ci 4.4 L
|
Bore/Stroke: |
4.40×4.40 inches 112 x 112 mm
|
Compression: |
16.3:1
|
Rated RPM: |
2070
|
Torque: |
264 lb-ft 358.0 Nm
|
Torque RPM: |
1400
|
Engine Oil |
Ford 6810 Mark III Transmission overview
Transmission: |
Dual Power
|
Gears: |
16 forward and 8 reverse
|
Clutch: |
330mm disc
|
Four synchronized gears in two ranges, plus reverse range, with two-speed Dual Power power shift. Optional creeper range. |
Ford 6810 Mark III Dimensions
2WD Wheelbase: |
87.5 inches 222 cm
|
4WD Wheelbase: |
88.9 inches 225 cm
|
2WD Length: |
145.2 inches 368 cm
|
4WD Length: |
153.1 inches 388 cm
|
2WD Ground clearance: |
17.3 inches 43 cm
|
4WD Ground clearance: |
15.2 inches 38 cm
|
2WD Front tread: |
52 to 890 inches 132 to 2260 cm
|
4WD Front tread: |
60 to 88 inches 152 to 223 cm
|
Rear tread: |
56 to 80 inches 142 to 203 cm
|
Ford 6810 Weight |
2WD ROPS : |
7280 lbs 3302 kg
|
2WD Cab : |
7700 lbs 3492 kg
|
4WD ROPS : |
7920 lbs 3592 kg
|
4WD Cab : |
8760 lbs 3973 kg
|
Ford 6810 Height |
|
78.4 inches 199 cm
|
Cab: |
104.8 inches 266 cm
|
2WD Exhaust: |
110 inches 279 cm
|
4WD Exhaust: |
113 inches 287 cm
|
FAQ
Is Ford 6810 Mark III a good tractor?
The Ford 6810 Mark III is one of the great tractors in the Ford stable, and it has earned Ford a fantastic reputation.
How much oil does a Ford 6810 Mark III take?
Check out the Ford 6810 Mark III oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Ford made the 6610
The Ford 6810 Mark III was an agricultural tractor model made from 1988 – 1991
|