Holder Cultitrac A12

Holder Cultitrac A12 Technical Specifications

Holder Cultitrac A12 is a Row-Crop tractor that was produced by the John Deere between 1956 – ????.

Below you will find detailed technical specifications for Holder Cultitrac A12 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Holder Cultitrac A12 Production

Manufacturer: Holder

Holder Cultitrac A12 Mechanical

Chassis: 4×4 articulated 4WD
Brakes: drum
Cab: Open operator station.
Transmission: 6-speed


Fuel: 2.5 gal
9.5 L
Hydraulic system: 1 gal
3.8 L


Type: open center
Capacity: 1 gal
3.8 L
Pressure: 1850 psi
127.6 bar
Pump flow: 2.6 gpm
9.8 lpm

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540/920

Holder Cultitrac A12 Engine detail

Engine Detail
Sachs D600L
Two-stroke engine.
Displacement: 36.9 ci
0.6 L
Bore/Stroke: 3.465×3.937 inches
88 x 100 mm
Power: 12 hp
8.9 kW
Fuel system: direct injection
Air cleaner: oil bath
Compression: 20:1
Rated RPM: 2200
Starter volts: 12

Holder Cultitrac A12 Transmission overview

Engine Oil

Gears: 6 forward and 3 reverse
Clutch: dry disc

Holder Cultitrac A12 Dimensions

Wheelbase: 45 inches
114 cm
Length: 80 inches
203 cm
Width: 30 inches
76 cm
Height (steering wheel): 44 inches
111 cm
Weight: 1500 lbs
680 kg
Ground clearance: 9.5 inches
24 cm


Is Holder Cultitrac A12 a good tractor?

The Holder Cultitrac A12 is one of the great tractors in the Holder stable, and it has earned Holder a fantastic reputation.

How much oil does a Holder Cultitrac A12 take?

Check out the Holder Cultitrac A12 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Holder made the ?

The Holder Cultitrac A12 was an agricultural tractor model made from 1956 – ????

Leave a Comment