IMT 558

IMT 558 Technical Specifications

IMT 558 is a Row-Crop tractor that was produced by the John Deere between 1970 – 1980.

Below you will find detailed technical specifications for IMT 558 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

IMT 558 Production

Manufacturer: IMT
Factory: Belgrade, Yugoslavia

IMT 558 Mechanical

Chassis: 4×2 2WD
Steering: manual
Cab: Open operator station.
Transmission: 6-speed gear

Power Take-off (PTO)

Rear RPM: 540 (1.375)
Engine RPM: 540@1690

IMT 558 Engine detail

Engine Detail
Displacement: 203.2 ci
3.3 L
Bore/Stroke: 3.60×5.00 inches
91 x 127 mm
Power: 58 hp
43.3 kW
Rated RPM: 2250
Firing order: 1-3-4-2
Starter volts: 12

IMT 558 Transmission overview

Engine Oil

Type: gear
Gears: 6 forward and 2 reverse
Three gears, plus reverse, in two ranges.

IMT 558 Dimensions

Wheelbase: 83.4 inches
211 cm
Length: 146.3 inches
371 cm
Width: 71.2 inches
180 cm
Height (steering wheel): 63.4 inches
161 cm
Weight: 5070.6 lbs
2300 kg


Is IMT 558 a good tractor?

The IMT 558 is one of the great tractors in the IMT stable, and it has earned IMT a fantastic reputation.

How much oil does a IMT 558 take?

Check out the IMT 558 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year IMT made the 558?

The IMT 558 was an agricultural tractor model made from 1970 – 1980

Categories IMT

Leave a Comment