International Harvester 4300 Hough built Technical Specifications
International Harvester 4300 is a Row-Crop tractor that was produced by the John Deere between 1961 – 1965.
Below you will find detailed technical specifications for International Harvester 4300 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 4300 Production
| Manufacturer: | |
| Distributor | International Harvester |
| Manufacturer | Hough |
| Four-wheel Drive (4WD) tractor | |
| Built in Libertyville, Illinois, USA | |
| Total built | 44 |
| Original price was $12,000 in 1970 | |
| The massive model 4300 tractor was International`s entry into the large four-wheel drive market. The tractor was built by Hough (manufacturer of the Pay Loader) and the final design was influenced by a desire to be larger than the John Deere 8010. Unfortunately for International, the 4300 was “too big, too soon” and production was limited. | |
| Engine: | 203.32 hp 151.6 kW |
International Harvester 4300 Electrical
| Charging system | alternator |
| Charging amps | 50 |
| Batteries | 4 |
| Battery volts | 6 |
International Harvester 4300 Mechanical
| Drive | 4×4 4WD |
| Steering | hydraulic powered two- or four-wheel steering |
| Air brakes brakes | |
| Open operator station. Cab optional with available air-conditioning. | |
Capacity
| Fuel | 168 gal 635.9 L |
| Steering | 60 qts 56.8 L |
Hydraulics
| Valves | 3 |
| Pump flow | 40 gpm 151.4 lpm |
| 55 gpmOptOptional 208.2 lpm | |
| Steering flow | 40 gpm 151.4 lpm |
| Steering cap. | 60 qts 56.8 L |
International Harvester 4300 Engine detail
| Engine Detail | |
| International Harvester DT-817 | |
| turbocharged diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 817 ci 13.4 L |
| Bore/Stroke | 5.375×6.00 inches 137 x 152 mm |
| Power | 300 hp 223.7 kW |
| Air cleaner | dry with paper element |
| Compression | 15.5:1 |
| Rated RPM | 2100 |
| Starter volts | 12 |
| Oil capacity | 34 qts 32.2 L |
| Coolant capacity | 69 qts 65.3 L |
| Engine Oil | |
| Gears | 6 forward and 1 reverse |
International Harvester 4300 Dimensions
| Wheelbase | 120 inches 304 cm |
| Length | 257 inches 652 cm |
| Width | 111.5 inches 283 cm |
| Operating weight | 29,815 lbs 13524 kg |
| Ground clearance | 19 inches 48 cm |
| International Harvester 4300 Height | |
| Steering wheel | 106.5 inches 270 cm |
| Cab | 129 inches 327 cm |
| Exhaust | 142.5 inches 361 cm |
International Harvester 4300 Tests
| Nebraska Tractor Test 815 | |
| Diesel 8-speed 4WD April 30 – May 14, 1962 Link: Nebraska Tractor Test 815 file | |
| Drawbar performance | |
| Max power | 203.32 hp 151.6 kW |
| Fuel use | 14.8 gal/hour 56.0 l/hour |
| Gear 4 used for power test. | |
| Max pull | 22,798 lbs 10341 kg |
| Gear 1 used for pull test. | |
FAQ
Is International Harvester 4300 a good tractor?
The International Harvester 4300 is one of the great tractors in the Hough stable, and it has earned Hough a fantastic reputation.
How much oil does a International Harvester 4300 take?
Check out the International Harvester 4300 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Hough made the ?
The International Harvester 4300 was an agricultural tractor model made from 1961 – 1965
How much does a International Harvester 4300 tractor weight?
Depending on the engine type, the International Harvester 4300 weight ranges from 29,815 lbs
13524 kg .
How much can a International Harvester 4300 Pull?
The max pulling capacity of the International Harvester 4300 tractors starts at 22,798 lbs
10341 kg but may be slightly higher depending on the trim.