International Harvester 434 Technical Specifications
International Harvester 434 is a Row-Crop tractor that was produced by the John Deere between 1966 – 1971.
Below you will find detailed technical specifications for International Harvester 434 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 434 Production
Manufacturer: |
Manufacturer: |
International Harvester
|
Type: |
Utility tractor
|
Factories: |
Bradford, England
|
|
Louisville, Kentucky, USA
|
International Harvester 434 Power
Engine: |
Engine: |
43 hp 32.1 kW
|
International Harvester 434 Engines |
International Harvester 2.5L 4-cyl diesel |
International Harvester 2.5L 4-cyl gasoline |
Fuel tank: |
12.7 gal 48.1 L
|
Mechanical |
Chassis: |
4×2 2WD
|
Steering: |
mechanical
|
Cab: |
Open operator station.
|
Transmission: |
8-speed
|
International Harvester 434 photos… |
Hydraulics |
Pump flow: |
7.0 gpm 26.5 lpm
|
Tractor hitch |
Rear lift: |
2579 lbs 1169 kg
|
Power Take-off (PTO) |
Rear RPM: |
540
|
Dimensions & Tires |
Wheelbase: |
76.38 inches 194 cm
|
Weight: |
4630 lbs 2100 kg
|
Front tire: |
7.50-16
|
Rear tire: |
12.4-32
|
Full dimensions and tires … |
434 Serial Numbers |
Location: |
Serial number plate on the right side of the 434 frame.
|
International Harvester 434 Electrical
Ground: |
positive
|
Charging system: |
Lucas generator
|
Charging amps: |
50
|
Battery CCA: |
1000
|
International Harvester 434 Mechanical
Chassis: |
4×2 2WD
|
Steering: |
mechanical
|
Cab: |
Open operator station.
|
Transmission: |
8-speed
|
Hydraulics
Pump flow: |
7.0 gpm 26.5 lpm
|
Tracktor Hitch
Rear lift: |
2579 lbs 1169 kg
|
Power Take-off (PTO)
International Harvester 434 Engine detail
Engine Detail |
International Harvester |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
154 ci 2.5 L
|
Bore/Stroke: |
3.50×4.00 inches 89 x 102 mm
|
Power: |
43 hp 32.1 kW
|
Rated RPM: |
2000
|
Torque: |
115.1 lb-ft 156.1 Nm
|
Torque RPM: |
1300
|
Starter volts: |
12
|
Oil capacity: |
6 qts 5.7 L
|
Engine Oil |
International Harvester 434 Transmission overview
Gears: |
8 forward and 2 reverse
|
International Harvester 434 Dimensions
Wheelbase: |
76.38 inches 194 cm
|
Length: |
118.11 inches 299 cm
|
Height: |
87.40 inches 221 cm
|
Weight: |
4630 lbs 2100 kg
|
FAQ
Is International Harvester 434 a good tractor?
The International Harvester 434 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 434 take?
Check out the International Harvester 434 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester 434 was an agricultural tractor model made from 1966 – 1971
How much can a International Harvester 434 Pull?
The max pulling capacity of the International Harvester 434 tractors starts at 5,282 lbs
2395 kg but may be slightly higher depending on the trim.
|