International Harvester 733 Utility tractor Specs & Features

Contents show

International Harvester 733 Utility tractor Technical Specifications

International Harvester 733 is a Row-Crop tractor that was produced by the John Deere between 1980 – 1990.

Below you will find detailed technical specifications for International Harvester 733 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

International Harvester 733 Production

Manufacturer:
Manufacturer:	International Harvester
Type:	Utility tractor
Factory:	Neuss, Germany

International Harvester 733 Electrical

Charging system:	alternator
Charging amps:	33
Charging volts:	14
Battery volts:	12
Battery AH:	88

International Harvester 733 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Differential lock:

mechanical rear

2WD Steering:

manual

4WD Steering:

power

Brakes:

hydraulic disc

Cab:

Four-post ROPS. Cab optional with heat.

Transmissions:

8-speed

16-speed

16-speed creeper

Capacity

Fuel:	15.85 gal 60.0 L
Hydraulic system:	3.2 gal 12.1 L

Hydraulics

Capacity:	3.2 gal 12.1 L
Pump flow:	8.5 gpm 32.2 lpm

Tracktor Hitch

Rear Type:	II
Rear lift:	4630 lbs 2100 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540

International Harvester 733 Engine detail

Engine Detail
International Harvester D-206
diesel
4-cylinder
liquid-cooled
Displacement:	206.4 ci 3.4 L
Bore/Stroke:	3.875×4.375 inches 98 x 111 mm
Power:	59 hp 44.0 kW
Fuel system:	direct injection
Air cleaner:	dry
Rated RPM:	2180
Torque:	154 lb-ft 208.8 Nm
Torque RPM:	1600
Starter volts:	12
Oil capacity:	9.5 qts 9.0 L
Coolant capacity:	18.5 qts 17.5 L

International Harvester 733 Transmission overview

Engine Oil

Gears:	8 forward and 4 reverse
Clutch:	280mm dry disc
Four gears (1-4) in two ranges, plus reverse range.

International Harvester 733 Dimensions

2WD Wheelbase:	86.2 inches 218 cm
4WD Wheelbase:	84.6 inches 214 cm
Length:	141.5 inches 359 cm
Width:	64.6 inches 164 cm
2WD Height (steering wheel):	60 inches 152 cm
4WD Height (steering wheel):	69.8 inches 177 cm
Clearance (front axle):	20.9 inches 53 cm
2WD Front tread:	48.5 to 69.7 inches 123 to 177 cm
4WD Front tread:	54.1 to 63.9 inches 137 to 162 cm
2WD Rear tread:	56.2 to 74.8 inches 142 to 189 cm
4WD Rear tread:	50.4 to 74.8 inches 128 to 189 cm

International Harvester 733 Weight
2WD ROPS :	5203 lbs 2360 kg
4WD ROPS :	5512 lbs 2500 kg
2WD Cab :	5368 lbs 2434 kg
4WD Cab :	5952 lbs 2699 kg

FAQ

Is International Harvester 733 a good tractor?

The International Harvester 733 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.

How much oil does a International Harvester 733 take?

Check out the International Harvester 733 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year International Harvester made the 633

The International Harvester 733 was an agricultural tractor model made from 1980 – 1990

How much can a International Harvester 733 Pull?

The max pulling capacity of the International Harvester 733 tractors starts at 8,026 lbs
3640 kg but may be slightly higher depending on the trim.