J.I. Case 300 Utility tractor Technical Specifications
J.I. Case 300 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for J.I. Case 300 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 300 Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Utility tractor | |
| Built in Rock Island, Illinois, USA | |
| Total built | 249 |
| Original price | $3,500 (1958) |
| Engine: | |
| Drawbar (claimed) | 22 hp 16.4 kW |
| Belt (claimed) | 27 hp 20.1 kW |
| Plows | 3 |
| Mechanical | |
| Two-wheel drive | |
| Steering | manual |
| 6-inch disc brakes | |
| Open operator station. | |
| J.I. Case 300 photos… |
| Power Take-off (PTO) | |
| Rear PTO | transmission (4-speed) |
| live (Tripl-Range) | |
| Rear RPM | 540 |
| Dimensions & Tires | |
| Wheelbase | 75.5 inches 191 cm |
| Weight | 3,400 lbs 1542 kg |
| Front tire | 6.00×16 |
| Rear tire | 11×24 |
| Full dimensions and tires … | |
| 300 Serial Numbers | |
| Location: | Serial number plate on the instrument panel. |
| 1956 | 6050301 |
| 1957 | 6075001 |
| 1958 | 6095001 |
J.I. Case 300 Mechanical
| Two-wheel drive | |
| Steering | manual |
| 6-inch disc brakes | |
| Open operator station. | |
Power Take-off (PTO)
| Rear PTO | transmission (4-speed) |
| live (Tripl-Range) | |
| Rear RPM | 540 |
J.I. Case 300 Engine detail
| Engine Detail | |
| Continental GD157 | |
| diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 157 ci 2.6 L |
| Bore/Stroke | 3.375×4.375 inches 86 x 111 mm |
| Air cleaner | oil bath |
| Pre-heating | ether |
| Compression | 15.5:1 |
| Rated RPM | 1750 |
| Starter volts | 12 |
| Coolant capacity | 12 qts 11.4 L |
| Engine Oil |
| Type | sliding gear |
| Gears | 4 forward and 1 reverse |
| Clutch | 234.9mm dry disc |
J.I. Case 300 Dimensions
| Wheelbase | 75.5 inches 191 cm |
| Length | 125 inches 317 cm |
| Height | 56 inches 142 cm |
| Weight | 3,400 lbs 1542 kg |
| Ground clearance | 12 inches 30 cm |
| Front tread | 47.5 inches 120 cm |
| Rear tread | 48 to 68 inches 121 to 172 cm |
FAQ
Is J.I. Case 300 a good tractor?
The J.I. Case 300 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 300 take?
Check out the J.I. Case 300 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 300 was an agricultural tractor model made from 1956 – 1958
How much does a J.I. Case 300 tractor weight?
Depending on the engine type, the J.I. Case 300 weight ranges from 3,400 lbs
1542 kg .