J.I. Case 310 Utility tractor Technical Specifications
J.I. Case 310 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for J.I. Case 310 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 310 Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Utility tractor | |
| Built in Rock Island, Illinois, USA | |
| Total built | 3,175 |
| Original price was $2,500 in 1958 | |
| Engine: | |
| Drawbar (claimed) | 23 hp 17.2 kW |
| Belt (claimed) | 29 hp 21.6 kW |
| Plows | 3 |
| Mechanical | |
| Two-wheel drive | |
| Steering | manual |
| 6-inch disc brakes | |
| Open operator station. | |
| J.I. Case 310 photos… |
| Power Take-off (PTO) | |
| Rear PTO | transmission (4-speed) |
| live (Tripl-Range) | |
| Rear RPM | 540 |
| Dimensions & Tires | |
| Wheelbase | 75.5 inches 191 cm |
| Weight | 3200 lbs 1451 kg |
| Front tire | 6.00×16 |
| Rear tire | 11×24 |
| Full dimensions and tires … | |
| 310 Serial Numbers | |
| Location: | Instrument panel |
| 1956 | 6050301 |
| 1957 | 6075001 |
| 1958 | 6095001 |
J.I. Case 310 Electrical
| Ground | positive |
| Battery volts | 6 |
J.I. Case 310 Mechanical
| Two-wheel drive | |
| Steering | manual |
| 6-inch disc brakes | |
| Open operator station. | |
Power Take-off (PTO)
| Rear PTO | transmission (4-speed) |
| live (Tripl-Range) | |
| Rear RPM | 540 |
J.I. Case 310 Engine detail
| Engine Detail | |
| J.I. Case G148 | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 148 ci 2.4 L |
| Bore/Stroke | 3.375×4.125 inches 86 x 105 mm |
| Air cleaner | oil bath |
| Compression | 7.1:1 |
| Rated RPM | 1750 |
| Starter volts | 6 |
| Coolant capacity | 12 qts 11.4 L |
| Engine Oil | |||
| Type | sliding gear |
| Gears | 4 forward and 1 reverse |
| Clutch | 234.9mm dry disc |
J.I. Case 310 Dimensions
| Wheelbase | 75.5 inches 191 cm |
| Length | 125 inches 317 cm |
| Height | 56 inches 142 cm |
| Weight | 3200 lbs 1451 kg |
| Ground clearance | 12 inches 30 cm |
| Front tread | 47.5 inches 120 cm |
| Rear tread | 48 to 68 inches 121 to 172 cm |
J.I. Case 310 Tests
| Nebraska Tractor Test 709 | |
| Gasoline 3-speed crawler July 14 – 31, 1959 Link: Nebraska Tractor Test 709 file | |
| PTO performance | |
| Power at rated engine speed: | 33.32 hp 24.8 kW |
| Fuel use: | 2.9 gal/hour 11.0 l/hour |
| Power at rated PTO speed: | 31.43 hp 23.4 kW |
| Fuel use: | 2.7 gal/hour 10.2 l/hour |
| Drawbar performance | |
| Max power: | 26.75 hp 19.9 kW |
| Fuel use: | 3.2 gal/hour 12.1 l/hour |
| Gear 2 used for power test. | |
| Max pull: | 5815 lbs 2637 kg |
| Gear 1 used for pull test. | |
FAQ
Is J.I. Case 310 a good tractor?
The J.I. Case 310 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 310 take?
Check out the J.I. Case 310 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 310 was an agricultural tractor model made from 1956 – 1958
How much does a J.I. Case 310 tractor weight?
Depending on the engine type, the J.I. Case 310 weight ranges from 3200 lbs
1451 kg .