J.I. Case 311 Row-Crop tractor Technical Specifications
J.I. Case 311 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for J.I. Case 311 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 311 Production
Manufacturer: | |
Manufacturer | J.I. Case |
Row-Crop tractor | |
Built in Rock Island, Illinois, USA | |
Total built | 8,465 |
Original price | $2,500 (1958) |
Engine: | 29.29 hp 21.8 kW |
Belt (tested) | 33.0 hp 24.6 kW |
J.I. Case 311 Electrical
Ground | positive |
Battery volts | 6 |
J.I. Case 311 Mechanical
Two-wheel drive | |
Steering | manual |
6-inch disc brakes | |
Open operator station. |
Hydraulics
Type | Duo-Control |
Valves | 1 (optional) |
Tracktor Hitch
Type | Case Eagle Hitch |
Power Take-off (PTO)
Rear PTO | transmission (4-speed) |
live (Tripl-Range) | |
Rear RPM | 540 |
J.I. Case 311 Engine detail
Engine Detail | |
J.I. Case G148 | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement | 148 ci 2.4 L |
Bore/Stroke | 3.375×4.125 inches 86 x 105 mm |
Air cleaner | oil bath |
Compression | 7.1:1 |
Rated RPM | 1750 |
Starter volts | 6 |
Coolant capacity | 12 qts 11.4 L |
Engine Oil |
Type | sliding gear |
Gears | 4 forward and 1 reverse |
Clutch | 234.9mm dry disc |
J.I. Case 311 Dimensions
Tricycle Wheelbase | 84.3 inches 214 cm |
Wide front Wheelbase | 79.7 inches 202 cm |
Tricycle Length | 131 inches 332 cm |
Wide-front Length | 125 inches 317 cm |
Height | 61 inches 154 cm |
Operating weight | 3,561 lbs 1615 kg |
Ballasted weight | 5,995 lbs 2719 kg |
Ground clearance | 21 inches 53 cm |
Front tread | 6.4.11.7 to inches 16 to 0 cm (tricycle) |
Front tread | 52 to 80 inches 132 to 203 cm (wide-front) |
Rear tread | 48 to 88 inches 121 to 223 cm |
J.I. Case 311 Tests
Nebraska Tractor Test 613 | |
Gasoline 4-speed 2WD April 15 – 23, 1957 Link: Nebraska Tractor Test 613 file | |
Belt power (max) | 33.0 hp 24.6 kW |
Belt fuel use (max) | 3.0 gal/hour 11.4 l/hour |
Drawbar performance | |
Max power | 29.29 hp 21.8 kW |
Gear 3 used for power test. | |
Max pull | 4,186 lbs 1898 kg |
Gear 1 used for pull test. |
FAQ
Is J.I. Case 311 a good tractor?
The J.I. Case 311 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 311 take?
Check out the J.I. Case 311 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 311 was an agricultural tractor model made from 1956 – 1958
How much does a J.I. Case 311 tractor weight?
Depending on the engine type, the J.I. Case 311 weight ranges from 3,561 lbs
1615 kg .
How much can a J.I. Case 311 Pull?
The max pulling capacity of the J.I. Case 311 tractors starts at 4,186 lbs
1898 kg but may be slightly higher depending on the trim.