J.I. Case 350

J.I. Case 350 Technical Specifications

J.I. Case 350 is a Row-Crop tractor that was produced by the John Deere between 1957.

Below you will find detailed technical specifications for J.I. Case 350 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

J.I. Case 350 Production

Manufacturer: J.I. Case
Type: Utility tractor
Factory: Rock Island, Illinois, USA
Total built: 199
Original price: $2,800 (1958 )
The Case 350 was an upgraded model 300 with a larger engine. It was available as the model 350 standard or the model 351 row-crop tractor.

J.I. Case 350 Mechanical

Chassis: 4×2 2WD
Steering: manual
Steering: power*Optional
Brakes: disc
Cab: Open operator station.
Transmissions: 12-speed gear
  4-speed gear

Tracktor Hitch

Type: Case Eagle Hitch

Power Take-off (PTO)

Rear PTO: live
Rear RPM: 540 (1.375)

J.I. Case 350 Engine detail

Engine Detail
J.I. Case
Displacement: 164.5 ci
2.7 L
Bore/Stroke: 3.6525×4.125 inches
93 x 105 mm
Air cleaner: oil bath
Compression: 7.25:1
Rated RPM: 1900
Torque: 136 lb-ft
184.4 Nm
Torque RPM: 1300
Starter volts: 12
Oil capacity: 5 qts
4.7 L
Coolant capacity: 12 qts
11.4 L

J.I. Case 350 Transmission overview

Engine Oil

Transmission: Tripl-Range
Type: gear
Gears: 12 forward and 3 reverse
Four gears (1-4) plus reverse (R), with three ranges per gear (low, direct, high).

J.I. Case 350 Dimensions

Wheelbase: 78.1 inches
198 cm
Length: 131.5 inches
334 cm
Width: 63.25 inches
160 cm
Height (steering wheel): 50.875 inches
129 cm
Height (hood): 52.5 inches
133 cm
Weight: 4275 lbs
1939 kg
Front tread: 52 inches
132 cm
Rear tread: 48 to 76 inches
121 to 193 cm


Is J.I. Case 350 a good tractor?

The J.I. Case 350 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.

How much oil does a J.I. Case 350 take?

Check out the J.I. Case 350 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year J.I. Case made the 350?

The J.I. Case 350 was an agricultural tractor model made from 1957

How much can a J.I. Case 350 Pull?

The max pulling capacity of the J.I. Case 350 tractors starts at 4,186 lbs
1898 kg but may be slightly higher depending on the trim.

Leave a Comment