J.I. Case 400 Standard-tread tractor Technical Specifications
J.I. Case 400 is a Row-Crop tractor that was produced by the John Deere between 1955 – 1957.
Below you will find detailed technical specifications for J.I. Case 400 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 400 Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Standard-tread tractor | |
| Built in Racine, Wisconsin, USA | |
| Total built | 2,077 |
| Original price | $4,400 (1958) |
| While an entire series of tractors was referred to as Case 400, the actual Case model 400 tractor was the standard-tread diesel version. The tractors in the 400 series are identified by a two-digit code (4xx). The second digit indicates the engine type: 0 for diesel (40x) and 1 for gas/lp (41x). The third digit indicates the chassis type: 0 for standard (4×0), 1 for row-crop (4×1), 3 for high-crop (4×3). | |
| Engine: | |
| Belt (claimed) | 50 hp 37.3 kW |
| Plows | 4 (14-inch) |
| Mechanical | |
| Two-wheel drive | |
| Steering | manual |
| power optional | |
| Mechanical dry discs brakes | |
| Open operator station. | |
| J.I. Case 400 photos… |
| Capacity | |
| Fuel | 21 gal 79.5 L |
| Hydraulic system | 2.25 gal 8.5 L |
| 2.6 gal (with Eagle Hitch) 9.8 L | |
| Hydraulics | |
| Capacity | 2.25 gal 8.5 L |
| 2.6 gal (with Eagle Hitch) 9.8 L | |
| Pressure | 600 psi 41.4 bar |
| Valves | 2 (optional) |
| Total flow | 12 gpm 45.4 lpm |
| Tractor hitch | |
| Type | Case Eagle Hitch |
| Power Take-off (PTO) | |
| Rear PTO | independent |
| Rear RPM | 540 |
| Dimensions & Tires | |
| Wheelbase | 82 inches 208 cm |
| Weight | 5600 to 6000 pounds |
| Front tire | 6.00-16 |
| Rear tire | 13-30 |
| Full dimensions and tires … | |
| 400 Serial Numbers | |
| 1955 | 8060000 |
| 1956 | 8080001 |
| 1957 | 8100001 |
J.I. Case 400 Electrical
| Ground | negative |
| Charging system | generator |
| Charging volts | 12 |
| Batteries | 2 |
| Battery volts | 6 |
| Battery AH | 150 |
J.I. Case 400 Mechanical
| Two-wheel drive | |
| Steering | manual |
| power optional | |
| Mechanical dry discs brakes | |
| Open operator station. | |
Capacity
| Fuel | 21 gal 79.5 L |
| Hydraulic system | 2.25 gal 8.5 L |
| 2.6 gal (with Eagle Hitch) 9.8 L |
Hydraulics
| Capacity | 2.25 gal 8.5 L |
| 2.6 gal (with Eagle Hitch) 9.8 L | |
| Pressure | 600 psi 41.4 bar |
| Valves | 2 (optional) |
| Total flow | 12 gpm 45.4 lpm |
Tracktor Hitch
| Type | Case Eagle Hitch |
Power Take-off (PTO)
| Rear PTO | independent |
| Rear RPM | 540 |
J.I. Case 400 Engine detail
| Engine Detail | |
| J.I. Case | |
| diesel | |
| 4-cylinder 8-valve | |
| liquid-cooled | |
| Displacement | 251 ci 4.1 L |
| Bore/Stroke | 4.00×5.00 inches 102 x 127 mm |
| Air cleaner | oil bath |
| Pre-heating | ether capsules |
| Compression | 15:1 |
| Rated RPM | 1500 |
| Idle RPM | 600-1600 |
| Firing order | 1-3-4-2 |
| Starter volts | 12 |
| Coolant capacity | 29.6 qts 28.0 L |
| Intake valve clearance | 0.012 inches (cold) 0.305 mm |
| Exhaust valve clearance | 0.012 inches (cold) 0.305 mm |
| Engine Oil | |
| Oil capacity | 9 qts 8.5 L |
| Oil change | 120 h |
| J.I. Case 400 Engine | |
J.I. Case 400 Transmission overview
| Transmission | Powr-range |
| Gears | 8 forward and 2 reverse |
| Oil capacity | 60 qts 56.8 L |
| Oil type | SAE 90 |
| Four gears plus reverse, with high and low ranges. All gears and ranges selected by a single lever. A “belt-neutral” position lies between the high and low ranges, intended for stationary work. Gears 7, 8, and high reverse are locked out on tractors equipped with steel wheels. | |
J.I. Case 400 Dimensions
| Wheelbase | 82 inches 208 cm |
| Length | 133 inches 337 cm |
| Width | 66.6 inches 169 cm |
| Weight | 6,000 lbs 2721 kg |
| Shipping weight | 5,600 lbs 2540 kg |
| Clearance (front axle) | 17.4 inches 44 cm |
| Front tread | 52 to 58 inches 132 to 147 cm |
| Rear tread | 52 to 64 inches 132 to 162 cm |
| J.I. Case 400 Height | |
| Steering wheel | 61.9 inches 157 cm |
| Hood | 61 inches 154 cm |
| Exhaust | 89 inches 226 cm |
FAQ
Is J.I. Case 400 a good tractor?
The J.I. Case 400 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 400 take?
Check out the J.I. Case 400 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 400 was an agricultural tractor model made from 1955 – 1957
How much does a J.I. Case 400 tractor weight?
Depending on the engine type, the J.I. Case 400 weight ranges from 5600 to 6000 pounds .
How much can a J.I. Case 400 Pull?
The max pulling capacity of the J.I. Case 400 tractors starts at 4,186 lbs
1898 kg but may be slightly higher depending on the trim.