J.I. Case 411-B

J.I. Case 411-B Row-Crop tractor Technical Specifications

J.I. Case 411-B is a Row-Crop tractor that was produced by the John Deere between 1958 – 1960.

Below you will find detailed technical specifications for J.I. Case 411-B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

J.I. Case 411-B Production

Manufacturer: J.I. Case
Type: Row-Crop tractor
Factory: Rock Island, Illinois, USA
Original price: $3,300 (1960 )
Advertised as the Case 400 Case-O-Matic, the Case 411B was an upgraded version of the Case 300 row-crop with the new Case-O-Matic torque converter transmission.

J.I. Case 411-B Power

PTO (claimed): 37 hp
27.6 kW
Plows: 3
Drawbar (tested): 29.72 hp
22.2 kW
PTO (tested): 37.12 hp
27.7 kW

J.I. Case 411-B Electrical

Ground: positive
Charging system: generator
Battery volts: 12
Battery AH: 50

J.I. Case 411-B Mechanical

Chassis: 4×2 2WD
Steering: manual
Brakes: differential mechanical dry disc
Cab: Open operator station.
Transmissions: 8-speed torque converter
  4-speed torque converter


Fuel: 13.8 gal
52.2 L
Hydraulic system: 3 gal
11.4 L


Type: open center
Capacity: 3 gal
11.4 L
Pressure: 1200 psi
82.7 bar

Tracktor Hitch

Type: Eagle Hitch

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540 (1.375)
Engine RPM: 541@1970

J.I. Case 411-B Engine detail

Engine Detail
J.I. Case
Displacement: 148 ci
2.4 L
Bore/Stroke: 3.375×4.125 inches
86 x 105 mm
Fuel system: carburetor
Air cleaner: oil bath
Compression: 7.1:1
Rated RPM: 2050
Idle RPM: 500-2125
Firing order: 1-3-4-2
Starter: electric
Starter volts: 12
Coolant capacity: 13 qts
12.3 L
Sparkplug: Champion D-16
Sparkplug gap: 0.025 inches
0.635 mm
Intake valve clearance: 0.014 inches
0.356 mm (cold)
Exhaust valve clearance: 0.014 inches
0.356 mm (cold)

J.I. Case 411-B Transmission overview

Engine Oil

Transmission: Case-O-Matic Dual Range
Type: torque converter
Gears: 8 forward and 2 reverse
Clutch: hydraulic disc

J.I. Case 411-B Dimensions

Wheelbase: 84.5 inches
214 cm (tricycle)
  79.5 inches
201 cm (GP)
Length: 130 inches
330 cm (tricycle)
  127.375 inches
323 cm (GP)
Width: 79.625 inches
202 cm
Height (steering wheel): 61 inches
154 cm
Operating weight: 4349 lbs
1972 kg *With 5.50-16 and 13-28 tires.
Ballasted weight: 8193 lbs
3716 kg *With front iron and rear fluid and iron.
Clearance (rear axle): 21.5 inches
54 cm
Front tread: 5.5/11.5 inches
13/29 cm(tricycle)
Front tread: 52 to 80 inches
132 to 203 cm (GP)
Front tread: 48 to 72 inches
121 to 182 cm (GP)
Front tread: 44 to 64 inches
111 to 162 cm (GP)
Rear tread: 48 to 88 inches
121 to 223 cm

J.I. Case 411-B Tests

Nebraska Tractor Test 689

Nebraska Tractor Test 689
Gasoline 8-speed 2WD
March 20 – April 16, 1959
Link: Nebraska Tractor Test 689 file
PTO performance
Power at rated engine speed: 37.12 hp
27.7 kW
Fuel use: 3.5 gal/hour
13.2 l/hour
Drawbar performance
Max power: 29.72 hp
22.2 kW
Fuel use: 3.3 gal/hour
12.5 l/hour
Gear 5 used for power test.
Max pull: 5,947 lbs
2697 kg
Gear 1 used for pull test.


Is J.I. Case 411-B a good tractor?

The J.I. Case 411-B is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.

How much oil does a J.I. Case 411-B take?

Check out the J.I. Case 411-B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year J.I. Case made the ?

The J.I. Case 411-B was an agricultural tractor model made from 1958 – 1960

Leave a Comment