J.I. Case 801-B Row-Crop tractor Technical Specifications
J.I. Case 801-B is a Row-Crop tractor that was produced by the John Deere between 1958 – 1960.
Below you will find detailed technical specifications for J.I. Case 801-B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 801-B Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Row-Crop tractor | |
| Built in Racine, Wisconsin, USA | |
| Original price was $5,600 in 1960 | |
| Engine: | 51.38 hp 38.3 kW |
| Belt (tested) | 54.42 hp 40.6 kW |
J.I. Case 801-B Mechanical
| Two-wheel drive | |
| Steering | power |
| Differential mechanical disc brakes | |
| Open operator station. | |
Tracktor Hitch
| Type | Case Eagle Hitch |
Power Take-off (PTO)
| Rear PTO | independent |
| Rear RPM | 540 (1.375) |
J.I. Case 801-B Engine detail
| Engine Detail | |
| J.I. Case | |
| diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 267 ci 4.4 L |
| Bore/Stroke | 4.125×5.00 inches 105 x 127 mm |
| Air cleaner | oil bath |
| Compression | 15:1 |
| Rated RPM | 1800 |
| Starter volts | 12 |
| Engine Oil | |||
| Transmission | Case-O-Matic |
| Type | torque converter |
| Gears | 8 forward and 2 reverse |
| Clutch | hydraulic wet disc |
| Four gears, plus reservse, in two ranges controlled with a single shift lever. Torque converter transmission with bypass to lock in direct drive. | |
J.I. Case 801-B Dimensions
| Wheelbase | 101.75 inches (wide front) 258 cm |
| 92.25 inches (tricycle) 234 cm | |
| Length | 152.75 inches (wide front) 387 cm |
| 143.375 inches (tricycle) 364 cm | |
| Width | 85.25 inches 216 cm |
| Height (hood) | 66 inches 167 cm |
| Operating weight | 6800 lbs 3084 kg |
| Ballasted weight | 9538 lbs 4326 kg |
| Front tread | 9.128 to 15.128 inches 23 to 38 cm (tricycle) |
| Front tread | 53 to 82 inches 134 to 208 cm |
| Rear tread | 52 to 88 inches 132 to 223 cm |
| Rear tread | 52 to 96 inches 132 to 243 cm (PAVT) |
| Rear tread | 52 to 108 inches 132 to 274 cm (long axle) |
| Rear tread | 52 to 116 inches 132 to 294 cm (PAVT long axle) |
J.I. Case 801-B Tests
| Nebraska Tractor Test 680 | |
| Diesel 8-speed 2WD October 27 – November 14, 1958 Link: Nebraska Tractor Test 680 file | |
| Belt power (max) | 54.42 hp 40.6 kW |
| Belt fuel use (max) | 4.0 gal/hour 15.1 l/hour |
| Drawbar performance | |
| Max power | 51.38 hp 38.3 kW |
| Fuel use | 4.1 gal/hour 15.5 l/hour |
| Gear 4 used for power test. | |
| Max pull | 7,888 lbs 3577 kg |
| Gear 2 used for pull test. | |
FAQ
Is J.I. Case 801-B a good tractor?
The J.I. Case 801-B is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 801-B take?
Check out the J.I. Case 801-B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 801-B was an agricultural tractor model made from 1958 – 1960
How much does a J.I. Case 801-B tractor weight?
Depending on the engine type, the J.I. Case 801-B weight ranges from 6800 lbs
3084 kg .
How much can a J.I. Case 801-B Pull?
The max pulling capacity of the J.I. Case 801-B tractors starts at 7,888 lbs
3577 kg but may be slightly higher depending on the trim.